Arizona Administrative Code
Title 12 - NATURAL RESOURCES
Chapter 15 - DEPARTMENT OF WATER RESOURCES
Article 8 - WELL CONSTRUCTION AND LICENSING OFWELL DRILLERS
Section R12-15-816 - Abandonment

Universal Citation: AZ Admin Code R 12-15-816

Current through Register Vol. 30, No. 38, September 20, 2024

A. Well abandonment shall be performed only by a licensed well drilling contractor or single well licensee.

B. Except as provided in subsection (F) of this Section, the owner of a well shall file a notice of intent to abandon the well prior to abandonment, on a form prescribed and furnished by the Director, which shall include:

1. The name and mailing address of the person filing the notice.

2. The legal description of the land upon which the well proposed to be abandoned is located and the name and mailing address of the owner of the land.

3. The legal description of the location of the well on the land.

4. The depth, diameter and type of casing of the well.

5. The well registration number.

6. The materials and methods to be used to abandon the well.

7. When abandonment is to begin.

8. The name and well drilling license number of the well drilling contractor or single well licensee who is to abandon the well.

9. The reason for the abandonment.

10. Such other information as the Director may require.

C. The Director shall, upon receipt of a proper notice of intent to abandon, mail a well abandonment authorization card to the designated well drilling contractor or single well licensee.

D. Except as described in subsection (F) of this Section, a well drilling contractor or single well licensee may commence abandoning a well only if the driller has possession of an abandonment card at the well site, issued by the Director in the name of the driller, authorizing the abandonment of that specific well or wells in that specific location.

E. Within 30 days after a well is abandoned pursuant to this Section, the well drilling contractor or single well licensee shall file with the Director a Well Abandonment Completion Report on a form prescribed and furnished by the Director which shall include the date the abandonment of the well was completed and such other information as the Director may require.

F. In the course of drilling a new well, the well may be abandoned without first filing a notice of intent to abandon and without an abandonment card. If the well is abandoned pursuant to this subsection without first filing a notice of intent to abandon and without an abandonment card, the well drilling contractor or single well licensee shall provide the following information in the Well Abandonment Completion Report:

1. The legal description of the land upon which the well was abandoned and the name and mailing address of the owner of the land.

2. The legal description of the location of the well on the land.

3. The depth, diameter and type of casing of the well prior to abandonment.

4. The well registration number.

5. The materials and methods used to abandon the well.

6. The name and well drilling license number of the well drilling contractor or single well licensee who abandoned the well.

7. The date of completion of the abandonment of the well.

8. The reason for the abandonment.

9. Such other information as the Director may require.

G. The abandonment of a well shall be accomplished through filling or sealing the well so as to prevent the well, including the annular space outside the casing, from being a channel allowing the vertical movement of water.

H. A well drilling contractor or single well licensee shall construct a surface seal for a well that does not penetrate an aquifer, as follows:

1. If the casing is removed from the top 20 feet of the well, a cement grout plug shall be set extending from two feet below the land surface to a minimum of 20 feet below the land surface, and the well shall be backfilled above the top of the cement grout plug to the original land surface.

2. If the casing is not removed from the top 20 feet of the well, a cement grout plug shall be set extending from the top of the casing to a minimum of 20 feet below the land surface and the annular space outside the casing shall be filled with cement from the land surface to a minimum of 20 feet below the land surface.

I. In addition to the surface seal required in subsection (H):

1. A well penetrating a single aquifer system with no vertical flow components shall be filled with cement grout, concrete, bentonite drilling muds, clean sand with bentonite, or cuttings from the well.

2. A well penetrating a single or multiple aquifer system with vertical flow components shall be sealed with cement grout or a column of bentonite drilling mud of sufficient volume, density, and viscosity to prevent fluid communication between aquifers.

J. Materials containing organic or toxic matter shall not be used in the abandonment of a well.

K. The owner or operator of the well shall notify the Director in writing no later than 30 days after abandonment has been completed. The notification shall include the well owner's name, the location of the well, and the method of abandonment.

Disclaimer: These regulations may not be the most recent version. Arizona may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.