Alaska Administrative Code
Title 8 - Labor and Workforce Development
Part 4 - Occupational Safety and Health Division
Chapter 80 - Boiler and Pressure Vessel Construction Code
Article 3 - Special Requirements for Alterations or Repair Authorization
8 AAC 80.120 - Authorization for alterations or welded repair
Universal Citation: 8 AK Admin Code 80.120
Current through August 30, 2024
Alterations or welded repair on boilers and unfired pressure vessels must be performed
(1) under the direct supervision of a special or deputy inspector; or
(2) by a person in possession of a repair stamp issued by the NB, if that person
(A)
submits a written quality-assurance system for acceptance by the chief
inspector; to be accepted, the quality-assurance system must detail the
personnel responsibilities and operating procedures for performing welded
repair in accordance with the ASME Codeor as defined in the
NBIC;
(B) has
available a copy of Section IX of the ASME Code,the sections
of the ASME Codethat are applicable to the vessel being worked
on, and the NBIC; and
(C) has submitted a tracer number request
form, paid the department a $100 tracer tracking fee, and received a tracer
number from the department's Anchorage office.
The tracer number request form prescribed in 8 AAC 80.120(2) is available by contacting the Department of Labor and Workforce Development, Mechanical Inspection Section, 1251 Muldoon Road, Suite 113, Anchorage, Alaska, 99504 [99510-7020], or by calling (907) 269-4925.
Authority:AS 18.60.180
AS 18.60.315
AS 18.60.360
Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
