Alaska Administrative Code
Title 8 - Labor and Workforce Development
Part 4 - Occupational Safety and Health Division
Chapter 80 - Boiler and Pressure Vessel Construction Code
Article 1 - Boiler and Pressure Vessel Construction Code
8 AAC 80.010 - Boiler and pressure vessel construction code

Universal Citation: 8 AK Admin Code 80.010

Current through August 30, 2024

(a) The department adopts by reference the following sections of the 2013 edition of the American Society of Mechanical Engineers' Boiler and Pressure Vessel Code (ASME code) as interpreted as of July 1, 2013:

(1) Section I, Rules for Construction of Power Boilers;

(2) Section II, Materials;

(3) Section IV, Rules for Construction of Heating Boilers;

(4) Section V, Nondestructive Examination;

(5) Section VI, Recommended Rules for Care and Operation of Heating Boilers;

(6) Section VII, Recommended Guidelines for the Care of Power Boilers;

(7) Section VIII, Rules for Construction of Pressure Vessels;

(8) Section IX, Welding, Brazing, and Fusing Qualifications;

(9) Section X, Fiber Reinforced Plastic Pressure Vessels.

(b) The department adopts by reference the American Petroleum Institutes" Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration 10th edition, May 2014, with Addenture 1, May 2017, Addenture 2, May 2018 (API 510)

(c) Canadian registration number (CRN) vessels that are designed and constructed in confonnance with the ASME Code, but do not bear the ASME symbol, will be approved for use upon receipt of the manufacturer's data sheet.

(d) A boiler or pressure vessel fabricated for installation in this state in accordance with AS 18.60.180 - 18.60.390 must bear a National Board of Boiler and Pressure Vessel Inspectors registration number. Cast iron heating boilers are exempt from the requirements of this subsection.

The American Society of Mechanical Engineers' Boiler and Pressure Vessel Code, and the American Petroleum Institute's Pressure Vessel Inspection Code: In Service Inspection, Rating, Repair, and Alteration, adopted by reference in 8 AAC 80.010, are available for public review at the Mechanical Inspection Section, Division of Labor Standards and Safety, Department of Labor and Workforce Development, 1251 Muldoon Rd. Suite 113, Anchorage, AK 99504; telephone (907) 269-4925, and may be obtained by contacting the American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016; telephone: (800) 843-2763; facsimile: (973) 882-1717; Internet address: http://www.asme.org or the American Petroleum institute, 200 Massachusetts Avenue NW, Suite 1100, Washington, DC 20001-5571; telephone (202) 682-000.

As of Register 151 (October 1999), the regulations attorney made technical revisions under AS 44.62.125(b)(6) to reflect the name change of the Department of Labor to the Department of Labor and Workforce Development made by ch. 58, SLA 1999 and the corresponding title change of the commissioner of labor.

Authority:AS 18.60.180

Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.