Alaska Administrative Code
Title 8 - Labor and Workforce Development
Part 4 - Occupational Safety and Health Division
Chapter 61 - Occupational Safety and Health
Article 11 - Occupational Safety and Health Standards
8 AAC 61.1150 - Additional bolting, riveting, fitting-up, and plumbing-up standards
Current through August 30, 2024
(a) In addition to the requirements set out in 29 C.F.R. 1926.752, as amended, when connecting beams,
(b) An employer may not allow an employee to install a prefabricated beam with studs protruding from the top flange of the beam.
(c) If traffic surface of a beam is rendered hazardous by the installation of studs after the beam is installed, the employer shall require that the surface be made safe by the erection of a wooden deck over the studs. The employer shall require that the wooden deck be secured to the beam in a manner as to overlap the beam by two inches on both sides of the beam.
(d) In this section,
Authority:AS 18.60.020
AS 18.60.030
AS 18.60.075