Alaska Administrative Code
Title 5 - Fish and Game
Part 1 - Commercial and Subsistence Fishing and Private Nonprofit Salmon Hatcheries
Chapter 35 - Tanner Crab Fishery
Article 5 - Registration Area A (Southeastern)
5 AAC 35.125 - Lawful gear for Registration Area A
Current through August 30, 2024
(a) Tanner crab may be taken only with Tanner crab pots or ring nets. Tanner crab taken by other means must be returned to the water without further harm.
(b) The following Tanner crab gear limits are in effect in Registration Area A:
(c) In Registration Area A, a Tanner crab ring net is a bag-shaped net suspended between no more than two frames. The bottom frame may not be larger in perimeter than the top frame and the maximum diameter of the ring net may not exceed six feet for a round ring net. For a ring net with a frame that is not round, the area encompassed by the larger frame may not exceed 29 square feet. The ring net web must be non-rigid and collapsible, and must lay flat so that when fishing it does not prohibit free movement of fish or shellfish across the net.
(e) Repealed 9/27/2009.
(d) In Registration Area A, a registered Tanner crab vessel may not have, at any time in the aggregate, more than the legal limit of gear on board the vessel, in the water in fishing condition, and in the water in non-fishing condition.
(f) In Registration Area A, pots used to take Tanner crab must be rigged to permit escapement of undersize Tanner crab as follows:
Authority:AS 16.05.251