Alaska Administrative Code
Title 5 - Fish and Game
Part 1 - Commercial and Subsistence Fishing and Private Nonprofit Salmon Hatcheries
Chapter 35 - Tanner Crab Fishery
Article 2 - General Provisions
5 AAC 35.051 - Tanner crab gear marking requirements

At least one buoy on each Tanner crab pot or ring net must be legibly marked with the permanent ADF&G vessel license plate number of the Tanner crab vessel operating the gear. The buoy must bear only the number of the vessel used in operating the gear. The number shall be painted on the top one-third of the buoy in numerals at least four inches high and one-half inch wide, in a color contrasting to that of the buoy. The buoy markings must be visible on the buoy above the water surface when the buoy is attached to the crab pot.

Authority:AS 16.05.251

AS 16.05.632