Alaska Administrative Code
Title 5 - Fish and Game
Part 1 - Commercial and Subsistence Fishing and Private Nonprofit Salmon Hatcheries
Chapter 35 - Tanner Crab Fishery
Article 10 - Registration Area J (Westward)
5 AAC 35.520 - Size limits for Registration Area J
Universal Citation: 5 AK Admin Code 35.520
Current through August 30, 2024
(a) Only male Tanner crab of the species Chionoecetes opilio3.1 inches or greater in width of shell may be taken or possessed.
(b) In the Bering Sea District, Tanner crab size limits are as follows:
(1) male C. bairdiTanner
crab, or hybrid Tanner crab conforming to the identification criteria described
in 5 AAC 35.521(a),
must be 4.8 inches or greater in width of shell, except that in the waters west
of 166º W. long., male C. bairdiTanner crab, or hybrid
Tanner crab conforming to the identification criteria described in
5
AAC 35.521(a), must be 4.4 inches or
greater in width of shell;
(2) male
C. opilioTanner crab, or hybrid Tanner crab conforming to the
identification criteria described at
5
AAC 35.521(b), must be 3.1 inches or
greater in width of shell.
Authority:AS 16.05.251
Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.