Alaska Administrative Code
Title 5 - Fish and Game
Part 1 - Commercial and Subsistence Fishing and Private Nonprofit Salmon Hatcheries
Chapter 28 - Groundfish Fishery
Article 4 - Eastern Gulf of Alaska Area (Registration Area A)
5 AAC 28.130 - Lawful gear for Eastern Gulf of Alaska Area

Universal Citation: 5 AK Admin Code 28.130

Current through August 30, 2024

(a) In the Northern Southeast Inside Subdistrict and Southern Southeast Inside Subdistrict, sablefish may be taken only with longlines and pots.

(b) In the Southeast District, a longline vessel may have aboard or use for taking bait a gillnet with mesh size of not over two and one-half inches and made of not greater than Number 20 gillnet thread.

(c) In the Northern and Southern Southeast Inside Subdistricts, flatfish (flounder and sole) may be taken in a directed trawl fishery only by beam trawl gear, and only under the authority of a permit issued by the commissioner under (l) of this section. In the permit the commissioner may specify open areas, fishing periods, gear and operating specifications, observer requirements, and completion of logbooks, available from the department, by the vessel operator.

(d) In the Southeast District,

(1) lingcod may be taken only by longline, dinglebar troll gear, power troll gear, hand troll gear, and mechanical jigging machines, except that in a directed fishery for lingcod, lingcod may be taken only by dinglebar troll gear, hand troll gear, and mechanical jigging machines;

(2) repealed 7/18/2003;

(3) Pacific cod, rockfish, shortspine thornyhead rockfish, and longspine thornyhead rockfish may be taken only by longline, dinglebar troll gear, power troll gear, hand troll gear, mechanical jigging machines, and pots, except that
(A) in a directed fishery for pelagic shelf rockfish, pelagic shelf rockfish may be taken only by dinglebar troll gear, hand troll gear, and mechanical jigging machines:

(B) in a directed fishery for demersal shelf rockfish, demersal shelf rockfish may be taken only by longline, dinglebar troll gear, hand troll gear, and mechanical jigging machines;

(4) repealed 7/18/2003.

(e) In areas open to a directed fishery for flatfish (flounder and sole) using beam trawl gear in the Northern and Southern Southeast Inside Subdistricts, a registered shrimp beam trawl vessel may trawl for flatfish using beam trawl gear in an area closed to shrimp trawling, if a cod-end mesh of at least five inches stretched measure is used.

(f) In the Eastern Gulf of Alaska Area, pots may not be longlined, except that pots may be longlined in the Northern Southeast Inside Subdistrict and Southern Southeast Inside Subdistrict sablefish fishery. In a directed fishery for sablefish, pots used to take sablefish must have at least two circular escape rings with a minimum inside diameter of three and three-fourths inches installed on opposing vertical or sloping walls.

(g) Repealed 7/14/2000.

(h) In the Eastern Gulf of Alaska Area,

(1) dinglebar troll gear is gear that consists of a single line that is retrieved and set with a troll gurdy or hand troll gurdy with a terminally attached weight from which one or more leaders with one or more lures or baited hooks are pulled through the water while a vessel is making way; only one troll gurdy line or hand troll gurdy line may be deployed in the water at any time.

(2) a mechanical jigging machine is a device that deploys a single line with lures or baited hooks and retrieves that line with electrical, hydraulic, or mechanically powered assistance; a mechanical jigging machine allows the line to be fished only in the water column, in a manner that the hooks connected to the line are fished seafloor; a mechanical jigging machine line may not be deployed while the vessel is making way under mechanized propulsion; the mechanical jigging machine line may not be anchored to the seafloor or operated unattached from the vessel; no more than five mechanical jigging machines may be operated from a vessel, with no more than 30 hooks per line operated from a mechanical jigging machine.

(i) Repealed 7/18/2003.

(j) Repealed 7/14/2000.

(k) A person may not operate a vessel that is using dinglebar troll gear and mechanical jigging machines at the same time.

(l) In the Eastern Gulf of Alaska Area, groundfish may be taken by trawl gear only under the authority of a permit issued by the commissioner, if the commissioner determines that issuing the permit is not inconsistent with 5 AAC 39.210.

Authority:AS 16.05.251

Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.