Alaska Administrative Code
Title 5 - Fish and Game
Part 1 - Commercial and Subsistence Fishing and Private Nonprofit Salmon Hatcheries
Chapter 06 - Bristol Bay Area
Article 3 - Salmon Fishery
5 AAC 06.341 - Vessel specifications and operations

Universal Citation: 5 AK Admin Code 06.341

Current through August 30, 2024

(a) No vessel registered for salmon net fishing may be more than 32 feet in overall length. An anchor roller may not extend more than eight inches beyond the 32-foot overall length, and any portion that extends beyond the 32-foot overall length may not be more than eight inches in width or height.

(b) For the purposes of this section,

(1) "anchor roller" means a device used solely in aid of deploying and retrieving anchor gear, and does not provide any additional flotation, planing surface, or structural support to the vessel;

(2) "fish drop-out basket" means a device used solely to prevent the loss of fish from a gillnet after the fish leaves the water and before it is brought on board the vessel; a "fish drop-out basket" does not provide any additional flotation, planing surface, or structural support to the vessel;

(3) "gillnet roller" means a device used solely in aid of deploying and retrieving drift gillnet gear; a "gillnet roller" does not provide any additional flotation or planing surface to the vessel;

(4) "outdrive" means part of the propulsion system of a vessel used for either steering or thrust; an "outdrive" does not provide any additional flotation or planing surface to the vessel;

(5) "outdrive guard" means a device of skeletal construction used solely to protect the outdrive unit of a vessel; an "outdrive guard" does not provide any additional flotation or planing surface and is not used for any other purpose such as a bench, platform, or storage area;

(6) "overall length" means the straight-line measurement between the extremities of the vessel, but does not include fish drop-out baskets, anchor rollers, gillnet rollers, trim tabs, outdrives, or outdrive guards;

(7) "trim tabs" means an extension of the bottom of a vessel, at the transom, which is no more than 18 inches long at its longest point; "trim tabs" do not provide any increased flotation, and their sole function is to provide trim to a vessel while underway.

Authority:AS 16.05.251

Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.