Alaska Administrative Code
Title 17 - Transportation and Public Facilities
Chapter 90 - Division of Measurement Standards
Article 3 - Electric Meters
17 AAC 90.540 - Meter size
Universal Citation: 17 AK Admin Code 17 AAC 90.540
Current through August 30, 2024
(a) A system supplying electricity that is offered for sale through a watthour meter must be adequately sized to provide the required voltage and amperage under all load conditions.
(b) The meter must
(1) be capable of accurately measuring the
rated current capacity or load of the electrical service to be
measured;
(2) have a current
capacity of not less than 100 percent of the rated current capacity of the
electrical service to be measured;
(3) be suitable in all other respects for the
electrical system to be measured.
(c) The overload capacity of a meter must be the largest load that can be accurately measured through that meter.
Authority:AS 45.75.040
AS 45.75.050
AS 45.75.070
AS 45.75.080
Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.