Alaska Administrative Code
Title 17 - Transportation and Public Facilities
Chapter 60 - Highway Signs for the Traveling Public
Article 2 - Logo Signs
17 AAC 60.115 - Logo sign placement limitations
Universal Citation: 17 AK Admin Code 17 AAC 60.115
Current through August 30, 2024
(a) A logo sign may be placed along the following segments of freeway or expressway:
(1) Glenn Highway from Muldoon interchange to
Parks Highway intersection;
(2)
Richardson Highway from Mitchell Expressway to Eielson Air Force Base
Gate;
(3) Mitchell Expressway from
Richardson Highway interchange to Geist/Parks Highway interchange;
(4) Steese Expressway from Johansen
Expressway to Haglebarger intersection;
(5) Egan Drive from Mendenhall Loop to
Glacier Highway intersection at 2.5 mile Egan Drive.
(b) In addition to the segments of freeway or expressway listed in (a) of this section, a logo sign may be placed along a freeway or expressway within an organized borough if the
(1) borough has more than 2,500 permanent
residents but no more than 10,000 permanent residents; and
(2) location is not within the urban portion
of an organized borough.
(c) A logo sign may not be placed at a location where the majority of the traffic exits the highway at the driveway or intersecting road.
Authority:AS 19.05.010
AS 19.05.020
AS 19.05.040
AS 19.25.105
AS 19.25.200
Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
