Alaska Administrative Code
Title 12 - Professional Regulations
Part 1 - Boards and Commissions Subject to Centralized Licensing
Chapter 36 - State Board of Registration for Architects, Engineers, and Land Surveyors
Article 1 - Registration and Licensing
12 AAC 36.185 - Use of seals
Current through February 24, 2025
(a) A registrant may
(b) If portions of drawings, documents, or other professional work are prepared by other registered professionals, a registrant may seal only that portion of the work for which the registrant has direct professional knowledge and direct supervisory control.
(c) Repealed 10/31/2019.
(d) The registrant shall include the date each time the registrant signs and seals a document by electronically or manually inserting the date within the seal or within two inches of the seal.
(e) The registrant, by sealing final drawings, takes responsibility for related discipline specifications included in the final drawings, unless under AS 08.48.221 the registrant certifies on the face of the document the extent of the registrant's responsibility.
(f) A registrant shall validate the seal on a document that has either
(g) The registrant shall include on all documents that are required to be signed and sealed
(h) On documents where multiple entities that are authorized to practice architecture, engineering, land surveying, or landscape architecture are indicated, the registrant shall clearly identify the sole proprietor, partnership, corporation, limited liability company, limited liability partnership, limited partnership, or other authorized entity responsible for the work.
(i) Drawings, engineering surveys, reports, and construction documents regarding the structural systems of a significant structure must be sealed by a registered structural engineer.
(j) The registrant or the owner of sealed documents shall retain them and keep them accessible for later reference.
Authority:AS 08.48.101
AS 08.48.111
AS 08.48.221