Alaska Administrative Code
Title 12 - Professional Regulations
Part 1 - Boards and Commissions Subject to Centralized Licensing
Chapter 21 - Construction Contractors
Article 2 - Specialty Contractor Trades
12 AAC 21.480 - Sheet metal contractor
Universal Citation: 12 AK Admin Code 21.480
Current through February 24, 2025
(a) A sheet metal contractor performs work in the following areas:
(1) manufacture,
fabrication, assembly, installation, and alteration of all ferrous or
nonferrous metal work;
(2) lagging
over insulation and duct lining;
(3) preparation of drawings taken from
architectural and engineering plans required for fabrication and erections of
sheet metal work;
(4) exterior wall
sheathing and siding;
(5) metal
roofing, flashing, and decking;
(6)
ornamental sheet metal work, including cornices;
(7) metal venting, chimneys, and
breaching;
(8) skylight
installation;
(9) lavatory
partitions;
(10) sheet metal
shelving;
(11) louvers;
(12) commercial or industrial food service
equipment; or
(13) demolition of
sheet metal.
(b) This specialty contractor category does not include sheet metal work subject to building codes identified in AS 08.18.171, including heating, ventilation, and air conditioning ducting and equipment. Work subject to those codes is done by a mechanical or general contractor under the supervision of a mechanical administrator licensed under AS 08.40.
Authority:AS 08.01.080
AS 08.18.021
AS 08.18.171
AS 44.33.020
Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
