Alaska Administrative Code
Title 11 - Natural Resources
Part 6 - Lands
Chapter 87 - Geothermal Drilling and Conservation
Article 3 - Drilling of Geothermal Wells
11 AAC 87.100 - Well identification
Universal Citation: 11 AK Admin Code 87.100
Current through August 30, 2024
(a) Every well and every operating geothermal drilling rig must be identified by a sign posted in a conspicuous place on or near the well. The sign must be of durable construction, large enough to be legible under normal conditions at a distance of 50 feet, and maintained in legible condition. Each sign must show
(1) the
name of the lease or ADL number, if applicable;
(2) the name of the landowner or
lessee;
(3) the name of the
operator;
(4) the well
number;
(5) the well surface
location by quarter section, township, range and meridian; and
(6) the drilling permit number, if
applicable.
(b) The name of each lease or unit must be different and distinct.
(c) The wells on each lease or property must be numbered in a logical and distinct sequence.
Authority:AS 41.06.020
AS 41.06.040
Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
