Alaska Administrative Code
Title 11 - Natural Resources
Part 6 - Lands
Chapter 53 - Records, Surveys, and Platting
Article 2 - Survey and Platting Standards
11 AAC 53.230 - Final plat standards
Universal Citation: 11 AK Admin Code 53.230
Current through August 30, 2024
(a) All final plats must conform to the general plat standards stated in sec. 210 of this chapter, and in addition must
(1) have the notary's seal and surveyor's
seal properly affixed;
(2) be
presented to the division with the original or a good quality reproducible
mylar with five blackline prints;
(3) have the original or reproducible and all
prints with all original signatures in all of the required places and in black
ink only; and
(4) after final
approval by the division and by a municipal platting authority, if applicable,
be submitted to the district recorder's office for the recording district
within which the land surveyed lies, for official filing; if the land surveyed
lies in more than one recording district, the plat must be submitted to each
for filing.
(b) After filing, the official filing data must be affixed to the plat bearing original signatures, and becomes a part of it. The division will retain the plat bearing original signatures and official filing data. It will send a duplicate original to the municipal platting authority having jurisdiction.
Authority:AS 08.48.221
AS 38.04.045
AS 38.04.900
AS 38.05.020
AS 40.15.010
Disclaimer: These regulations may not be the most recent version. Alaska may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
