Alabama Administrative Code
Title 880 - ALABAMA SURFACE MINING COMMISSION
Chapter 880-X-8J - SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION REQUIREMENTS FOR PERMITS FOR SPECIAL CATEGORIES OF MINING
Section 880-X-8J-.10 - Augering

Universal Citation: AL Admin Code R 880-X-8J-.10

Current through Register Vol. 42, No. 5, February 29, 2024

(1) This Rule applies to any person who conducts or intends to conduct surface coal mining and reclamation operations utilizing augering operations.

(2) Any application for a permit for operations covered by this Rule shall contain, in the mining and reclamation plan, a description of the augering methods and the measures to be used to comply with Rule 880-X-10F.

(3) No permit shall be issued for any operations covered by this Rule unless the operation will be conducted in compliance with Rule 880-X-10F and all applicable requirements of this Chapter.

Author:

Statutory Authority: Code of Ala. 1975, §§ 9-16-71, 73, 74, 75, 80, 81, 82, 83, 84, 85, 86, 88, 90, 91, 92.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.