Alabama Administrative Code
Title 80 - ALABAMA DEPARTMENT OF AGRICULTURE AND INDUSTRIES
MARKETING
Chapter 80-11-2 - RULES GOVERNING SEED LABELING, SAMPLING AND RECORDKEEPING
Section 80-11-2-.03 - Labeling Requirements For Treated Seed

Universal Citation: AL Admin Code R 80-11-2-.03

Current through Register Vol. 42, No. 11, August 30, 2024

(a) In addition to the labeling requirements for treated seed appearing in Code of Alabama 1975, § 2-26-7(e), the separate tag required for seed treated for seed-borne disease shall show the kind of chemical used and the manufacturer's recommended rate or the rate actually used.

(b) The information required for the separate tag to be placed on treated seed under § 2-26-7(e) and this Chapter shall appear on the tag in substantially the same order as appearing below:

1. Treated seed tag.
A R A S A N T R E A T E D
(THIRAM) (Red Print)
Treated at rate specified by manufacturer
or state the rate actually used
DO NOT USE FOR FOOD, FEED OR
OIL PURPOSES

2. Poison treated seed tag.
P O I S O N T R E A T E D (Red Print)
(MERCURY) (Red Print)
(Skull & (Skull &
Crossbones) Treated with Ceresan crossbones)
Treated at rate specified by manufacturer
or state the rate actually used
DO NOT USE FOR FOOD, FEED OR
OIL PURPOSES

As required under law, the words "Poison Treated", appearing on the above tag shall be in heavy red type of not less than 1/4 inch.

Author: Charles H. Barnes.

Statutory Authority: Code of Ala. 1975, § 2-26-3.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.