Alabama Administrative Code
Title 80 - ALABAMA DEPARTMENT OF AGRICULTURE AND INDUSTRIES
AGRICULTURAL CHEMISTRY
Chapter 80-1-16 - STANDARDS FOR GASOLINE AND GASOHOL
Section 80-1-16-.09 - Labeling Requirements For Motor Fuels Containing Alcohol

Universal Citation: AL Admin Code R 80-1-16-.09

Current through Register Vol. 42, No. 11, August 30, 2024

(1) Any dispensing device which is used to dispense gasoline as defined in Code of Ala. 1975, § 8-17-80(a)(1), which contains more than one percent, by volume, of any ethanol or methanol shall also be labeled on both sides of the dispensing device, which face the vehicle, as follows: Contains Ethanol, or Contains Methanol and Cosolvent.

(2) The labeling requirement set out in paragraph (1) above shall be composed of black letters with a distinctly contrasting background. The letters appearing on the label shall be a minimum of one-half inch in height with a minimum one-sixteenth stroke.

Author: Charles H. Barnes

Statutory Authority: Code of Ala. 1975, § 8-17-81.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.