Alabama Administrative Code
Title 480 - ALABAMA DEPARTMENT OF LABOR
Chapter 480-3-3 - MINE SAFETY
Section 480-3-3-.37 - Responsibility Of Operators And Employees
Universal Citation: AL Admin Code R 480-3-3-.37
Current through Register Vol. 43, No. 02, November 27, 2024
(1) It shall be the responsibility of the operator to perform the following:
(a)
Provide safe plant and equipment.
(b) Safeguard all machinery.
(c) Place no new machinery or equipment in
operation unless full attention has been paid to its safety.
(d) Plan and arrange all processes and
operations with careful attention to safety.
(e) Maintain a system of inspection to
discover correctable hazards.
(f)
Maintain safety minded supervision.
(g) Train, educate and stimulate its
employees to follow safe methods of work and take a sincere interest in the
safety of themselves and their fellow workers.
(h) Investigate all accidents to determine
how best to prevent a recurrence.
(i) Keep proper record of all cases of
injury.
(2) It shall be the responsibility of the employee to:
(a) Use
all safeguards provided.
(b) Comply
with the mine safety rules and follow the safety rules and regulations
prescribed by the Department.
(c)
To follow safe methods for performing work.
(d) To continue guarding against injury to
himself and his fellow employees.
(e) Immediately report to his supervisor all
hazardous conditions which come to his attention.
(f) To report all injuries, regardless of
severity, to his immediate supervisor.
Author: Marcus Davis, Workers' Compensation Examiner.
Statutory Authority: Code of Ala. 1975, § 25-2-13(2).
Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
