Alabama Administrative Code
Title 480 - ALABAMA DEPARTMENT OF LABOR
Chapter 480-3-3 - MINE SAFETY
Section 480-3-3-.10 - Hoisting Signal Code
Universal Citation: AL Admin Code R 480-3-3-.10
Current through Register Vol. 43, No. 02, November 27, 2024
The following code of signals shall be used for the operation of hoists. (All signals used for hoisting of men shall be acknowledged by the hoisting engineer before men may enter the shaft or slope conveyance.)
1 ring--stop
2 rings--hoist
3 rings--lower
4 rings-- hoist slowly
5 rings -- lower slowly
8 rings -- man on skip, cage or trip followed by hoist slowly or lower slowly signals after men have entered cage, skip or trip.
Author: Marcus Davis, Workers' Compensation Examiner.
Statutory Authority: Code of Ala. 1975, § 25-2-13(2).
Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
