Alabama Administrative Code
Title 440 - ALABAMA BOARD OF HEATING, AIR CONDITIONING AND REFRIGERATION CONTRACTORS
Chapter 440-X-5 - MINIMUM STANDARDS FOR INSTALLATION, SERVICE, AND REPAIR OF HEATING, AIR CONDITIONING OR REFRIGERATION SYSTEMS BY CERTIFIED CONTRACTORS
Section 440-X-5-.04 - Obligation To Furnish Information Regarding Installation, Service, Or Repair Of A Residential Or Commercial Heating And Air Conditioning System Or Commercial Refrigeration System

Universal Citation: AL Admin Code R 440-X-5-.04

Current through Register Vol. 42, No. 11, August 30, 2024

All certified heating and air conditioning contractors and certified refrigeration contractors shall be required to provide the Board, upon request, a copy of all heat gain, heat loss, duct design plans, gas piping plans, other load calculations, or drawings, and any information used by the certified contractor pertaining to the installation, service, and/or repair of residential or commercial heating, air conditioning systems, and/or commercial refrigeration systems.

Previous Rule .03 was renumbered .04 as per certification published November 30, 2022; effective January 14, 2023.

Author: Jeffrey M. Becraft

Statutory Authority: Code of Ala. 1975, § 34-31-21(g).

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.