Alabama Administrative Code
Title 440 - ALABAMA BOARD OF HEATING, AIR CONDITIONING AND REFRIGERATION CONTRACTORS
Chapter 440-X-5 - MINIMUM STANDARDS FOR INSTALLATION, SERVICE, AND REPAIR OF HEATING, AIR CONDITIONING OR REFRIGERATION SYSTEMS BY CERTIFIED CONTRACTORS
Section 440-X-5-.03 - Compliance With Updated Or Amended Versions

Universal Citation: AL Admin Code R 440-X-5-.03

Current through Register Vol. 42, No. 11, August 30, 2024

All certified contractors shall be required to provide the Board, if requested, a copy of the heat gain, heat loss, duct sizing, gas piping calculations drawings or other information used by the certified contractor or concerning the installation, service, and repair of heating, air conditioning or refrigeration systems by the certified contractor.

Previous Rule .02 was renumbered .03 as per certification published November 30, 2022; effective January 14, 2023.

Author: Jeffrey M. Becraft

Statutory Authority: Code of Ala. 1975, § 34-31-21(g).

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.