Alabama Administrative Code
Title 420 - ALABAMA STATE BOARD OF HEALTH
Chapter 420-3-27 - LEAD HAZARD REDUCTION CONTRACTOR CERTIFICATION
Section 420-3-27-.13 - Clearance Levels And Lead Hazard Levels

Universal Citation: AL Admin Code R 420-3-27-.13

Current through Register Vol. 42, No. 11, August 30, 2024

Clearance procedures shall be conducted on all abatement projects by an accredited inspector or risk assessor of a certified firm after appropriate cleaning has been completed.

(1) Independence/Conflict of Interest - Clearance testing shall be performed by accredited persons or entities independent of those performing hazard reduction activities. If accredited in-house employees are used to conduct clearance testing, the in-house accredited employee shall not have played a part in performing that abatement work.

(2) Clearance Levels and Lead Hazard Levels for Risk Assessment - Clearance levels established in 40 CFR Part 745 must be met. If the residual lead level exceeds the applicable clearance level, the components represented by the failed sample shall be recleaned and retested.

Authors: Phyllis Mardis, Salvador Gray, Charles Brookins, Gary Jones, Steven McDaniel

Statutory Authority: Code of Ala 1975, § 22-37A-1, et seq.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.