Alabama Administrative Code
Title 420 - ALABAMA STATE BOARD OF HEALTH
Chapter 420-3-1 - ONSITE SEWAGE TREATMENT AND DISPOSAL
Tanks, Advanced Treatment, And Pumps
Section 420-3-1-.26 - Advanced Treatment System (ATS) Specifications
Universal Citation: AL Admin Code R 420-3-1-.26
Current through Register Vol. 42, No. 11, August 30, 2024
(1) A person proposing to market a proprietary advanced treatment system (ATS) shall submit ADPH Form CEP-13. The application shall include the following information:
(a) Documentation that the ATS has been
certified as meeting the appropriate NSF, Committee for Standardization (CEN),
or the Bureau de normalisation du Quebec (BNQ) Standard.
(b) Design hydraulic loading capacity
(gallons per day) and design organic loading capacity (pounds of BOD per
day).
(2) An ATS shall comply with the following requirements:
(a)
The conditions of a Performance Permit or be currently listed and certified by
a testing organization as meeting the appropriate NSF. CEN, or BNQ
standard.
(b) Be capable of
producing effluent that meets secondary effluent standards as defined by these
rules.
Previous Rule .37 was renumbered .26 per certification published December 30, 2022; effective February 13, 2023.
Author: Thad Pittman, Matthew Conner, Ken Stephens, Bob Bright
Statutory Authority: Code of Ala. 1975, §§ 22-2-2(4); 22-2-2(6); 22-10-1, et seq.; 22-26-1, et seq.
Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
