Alabama Administrative Code
Title 420 - ALABAMA STATE BOARD OF HEALTH
Chapter 420-3-1 - ONSITE SEWAGE TREATMENT AND DISPOSAL
Tanks, Advanced Treatment, And Pumps
Section 420-3-1-.18 - Tank Manufacturer Inspections

Universal Citation: AL Admin Code R 420-3-1-.18

Current through Register Vol. 42, No. 11, August 30, 2024

(1) An inspection shall be made upon initial application for a new tank series. At the discretion of the LHD, tanks greater than 1,500 gallons may not be required to be available for inspection at the manufacturing facility or at a staging area.

(2) The LHD or ADPH may perform periodic inspections for all tank series to determine compliance with these rules.

(a) When deemed necessary, the LHD or ADPH may make periodic inspections of larger tanks at a site specified by the LHD or ADPH.

Previous Rule .30 was renumbered .18 per certification published December 30, 2022; effective February 13, 2023.

Authors: Thad Pittman, Pam Lockett

Statutory Authority: Code of Ala. 1975, §§ 22-2-2(4); 22-2-2(6); 22-10-1, et seq.; 22-26-1, et seq.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.