Alabama Administrative Code
Title 420 - ALABAMA STATE BOARD OF HEALTH
Chapter 420-3-1 - ONSITE SEWAGE TREATMENT AND DISPOSAL
General Requirements
Section 420-3-1-.12 - Requirements For All Permit Applications

Universal Citation: AL Admin Code R 420-3-1-.12

Current through Register Vol. 43, No. 02, November 27, 2024

(1) An application for a new permit or reissuance of an existing permit shall be submitted using the following forms designated by ADPH:

(a) ADPH Form CEP-2 is used to apply for a Permit to Install for Small-Flow developments and individual Small-Flow Systems in a Large-Flow Development.

(b) The ADPH Form CEP-3, Section A is used for Large-Flow Developments, and ADPH Form CEP-3, Section Bis used for Large-Flow Systems.

(c) ADPH Form CEP-3, Section C, is used for performance permits.

(d) ADPH Form CEP-11 is used to apply for a Pre-made. Septic Tank, Grease Trap, and Holding Tank permit.

(e) ADPH Form CEP-13 is used to apply for a proprietary product permit.

(2) All applications are subject to 420-3-1-.13 Time Limitations and Permitting Actions.

(3) ADPH or the LHD may assess a fee where fee authorization exists.

Previous Rule .11 was renumbered .12 per certification published December 30, 2022; effective February 13, 2023.

Authors: Thad Pittman, Matthew Conner, Ken Stephens, Bob Bright

Statutory Authority: Code of Ala. 1975, §§ 22-2-2(4); 22-2-2(6); 22-10-1, et seq.; 22-26-1et seq; 22-25B-1, et seq.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.