Alabama Administrative Code
Title 400 - STATE OIL AND GAS BOARD OF ALABAMA
GOVERNING COALBED METHANE GAS OPERATIONS
Chapter 400-3-6 - PRODUCTION
Section 400-3-6-.01 - General
Universal Citation: AL Admin Code R 400-3-6-.01
Current through Register Vol. 42, No. 11, August 30, 2024
The design and construction of all wells and production facilities shall be based on sound engineering principles and must take into account the composition of the well stream, maximum pressures, and other pertinent engineering data and information. All flowing wells shall be equipped with a master valve and adequate chokes or beans to properly control the flow thereof. The Supervisor may approve alternative procedures for properly controlling well flow, upon request by the operator.
Author: State Oil and Gas Board
Statutory Authority: Code of Ala. 1975, §§ 9-17-1, et seq.
Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
