Alabama Administrative Code
Title 400 - STATE OIL AND GAS BOARD OF ALABAMA
GOVERNING COALBED METHANE GAS OPERATIONS
Chapter 400-3-5 - TESTING AND ALLOWABLE
Section 400-3-5-.05 - Production Test

Universal Citation: AL Admin Code R 400-3-5-.05
Current through Register Vol. 42, No. 11, August 30, 2024

An operator completing a new well or recompleting an old well shall first obtain approval to produce pursuant to Rule 400-3-5-.03, and during production, test the well to determine its capacity to produce. The test shall be for a minimum of twenty-four (24) hours' duration. The results thereof shall be verbally reported to the Supervisor immediately and filed with the Board on Form OGB-9, First Production or Retest Report, within fifteen (15) days after such test is completed. When more than one test is made, the reverse side of Form OGB-9 may be used to give complete test data. The test shown on the front side shall be considered the official test results for such well.

Author: State Oil and Gas Board

See history note at end of chapter.

Statutory Authority: Code of Ala. 1975, §§ 9-17-1, et seq.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.