Alabama Administrative Code
Title 400 - STATE OIL AND GAS BOARD OF ALABAMA
GOVERNING COALBED METHANE GAS OPERATIONS
Chapter 400-3-5 - TESTING AND ALLOWABLE
Section 400-3-5-.02 - Swabbing And Cleaning Wells

Universal Citation: AL Admin Code R 400-3-5-.02
Current through Register Vol. 42, No. 11, August 30, 2024

Flow tests of less than twenty-four (24) hours, including swabbing and cleaning a well, shall not be considered as a production test. A record of the daily operation of well cleaning shall be reported on the reverse side of Form OGB-9, First Production or Retest Report, giving pressure data and the volumes of water, fracture fluid, oil or condensate, and gas recovered. Unless otherwise approved by the Supervisor, all wells shall be cleaned into a tank prior to production. The tank shall be of sufficient size to contain all fluids.

Author: State Oil and Gas Board

See history note at end of chapter.

Statutory Authority: Code of Ala. 1975, §§ 9-17-1, et seq.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.