Alabama Administrative Code
Title 400 - STATE OIL AND GAS BOARD OF ALABAMA
GOVERNING COALBED METHANE GAS OPERATIONS
Chapter 400-3-4 - DRILLING
Section 400-3-4-.15 - Report Of Well Plugging
Universal Citation: AL Admin Code R 400-3-4-.15
Current through Register Vol. 43, No. 02, November 27, 2024
Within thirty (30) days after the plugging of any well, an operator shall file Form OGB-11, Report of Well Plugging, with the Supervisor setting forth in detail the method used in plugging such well. A schematic showing the down-hole construction of the well, including the depths and lengths of plugs, shall accompany Form OGB-11.
Author: State Oil and Gas Board
Statutory Authority: Code of Ala. 1975, §§ 9-17-1, et seq.
Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
