Alabama Administrative Code
Title 400 - STATE OIL AND GAS BOARD OF ALABAMA
GOVERNING COALBED METHANE GAS OPERATIONS
Chapter 400-3-4 - DRILLING
Section 400-3-4-.13 - Blow-Out Prevention

Universal Citation: AL Admin Code R 400-3-4-.13
Current through Register Vol. 42, No. 11, August 30, 2024

All operations shall be conducted in a manner to ensure continuous control of the well. Adequate well control equipment and procedures shall be used to prevent uncontrolled release of methane, produced water, completion fluids or other material during completion operations. The method of well control may consist of conventional blow-out preventers, stripper heads, and other methods that may be approved by the Supervisor.

Author: State Oil and Gas Board

Statutory Authority: Code of Ala. 1975, §§ 9-17-1, et seq.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.