Alabama Administrative Code
Title 364 - ALABAMA BOARD OF LICENSURE FOR PROFESSIONAL GEOLOGISTS
Chapter 364-X-11 - SEALS
Section 364-X-11-.02 - Seal Of The Licensee

Universal Citation: AL Admin Code R 364-X-11-.02

Current through Register Vol. 43, No. 02, November 27, 2024

(1) Upon approval of his/her application by the Board, the registrant will be advised that he/she may secure an official seal which shall be applied to geological drawings, specifications, reports and other geological documents prepared by him or under his responsible supervising control in accordance with Code of Ala. 1975, § 34-41-14(a).

(2) The seals to be used by the licensees are to be circular in form and at least 1 5/8 inches in diameter with copy of the design to be furnished each licensee upon registration.

(3) Rubber stamps, identical in size, design, and content with the approved seals, or a board-issued electronic seal, may be used by the licensee at his/her option.

Author: Thornton Neathery

Statutory Authority: Code of Ala. 1975, § 34-41-14.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.