Alabama Administrative Code
Title 364 - ALABAMA BOARD OF LICENSURE FOR PROFESSIONAL GEOLOGISTS
Chapter 364-X-11 - SEALS
Section 364-X-11-.01 - Seal Of The Board

Universal Citation: AL Admin Code R 364-X-11-.01
Current through Register Vol. 43, No. 02, November 27, 2024

A seal of the Board shall be imprinted on all certificates issued by the Board. This seal of the Board shall be circular in form and at least two (2) inches in diameter. No corporation or company many use the seal of the Board, or any representation thereof, in any manner to advertise the licensure of its employees by the Board or to imply licensure or sanction by the Board. However, a licensed professional geologist, as defined under Code of Ala. 1975, § 34-41-3(7), may use the seal of the Board, or a representation thereof, on his or her individual business stationary or business cards but must indicate his or her license number in a prominent manner in conjunction therewith, with the seal of the Board not exceeding 1.5 inches in diameter. Otherwise than is specifically permitted by this rule, the use of the seal of the Board, or any representation thereof, for any purpose is prohibited without the express written permission of the Board.

Author: Thornton L. Neathery

Statutory Authority: Code of Ala. 1975, § 34-41-5.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.