Alabama Administrative Code
Title 170 - STATE OF ALABAMA BUILDING COMMISSION
Chapter 170-X-3 - RULES FOR SUBMITTING PLANS AND SPECIFICATIONS TO THE TECHNICAL STAFF
Section 170-X-3-.04 - Documents To Be Prepared By Registered Design Professionals

Universal Citation: AL Admin Code R 170-X-3-.04

Current through Register Vol. 42, No. 5, February 29, 2024

(1) Plans and specifications submitted to the Technical Staff for approval shall be prepared by a full professional team composed of architects and engineers, registered in Alabama, each preparing that phase of the design within his or her field of specialization. Subject to the Director's approval, exceptions may be made where engineering services are of such minor nature as to be considered purely incidental to the architectural services or the architectural services are of such minor nature as to be considered purely incidental to the engineering services.

(2) The specification cover shall bear the Alabama seal of registration of the primary design professional who prepared them or under whose supervision they were prepared.

(3) Architectural drawings shall bear the Alabama seal of registration of the architect who prepared them or under whose supervision they were prepared. Engineering drawings shall bear the Alabama seal of registration of the engineer who prepared them or under whose supervision they were prepared.

Author: Stedmann B. McCollough, Director

Statutory Authority: Code of Ala. 1975, §§ 34-2-32, 34-2-35, 34-11-7, 41-9-141.

Disclaimer: These regulations may not be the most recent version. Alabama may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.