National Highway Traffic Safety Administration 2012 – Federal Register Recent Federal Regulation Documents
Results 51 - 100 of 186
Request for Comments on a Renewal of a Previously Approved Information Collection: Automotive Fuel Economy Reports
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on May 18, 2012 (77 FR 29751). No comments were received.
Early Warning Reporting, Foreign Defect Reporting, and Motor Vehicle and Equipment Recall Regulations
NHTSA is proposing amendments to certain provisions of the early warning reporting (EWR) rule and the regulations governing motor vehicle and equipment safety recalls. The amendments to the EWR rule would require light vehicle manufacturers to specify the vehicle type and the fuel and/or propulsion system type in their reports and add new component categories of stability control systems for light vehicles, buses, emergency vehicles, and medium-heavy vehicle manufacturers, and forward collision avoidance, lane departure prevention, and backover prevention for light vehicle manufacturers. In addition, NHTSA proposes to require motor vehicle manufacturers to report their annual list of substantially similar vehicles via the Internet. As to safety recalls, we propose, among other things, to require certain manufacturers to submit vehicle identification numbers (VIN) for recalled vehicles and to daily report changes in recall remedy status for those vehicles; require online submission of recalls reports and information; and require adjustments to the required content of the owner notification letters and envelopes required to be issued to owners and purchasers of recalled vehicles and equipment.
Civil Penalties
This document proposes to increase the maximum civil penalty amounts for violations of motor vehicle safety requirements for the National Traffic and Motor Vehicle Safety Act, as amended, and violations of bumper standards and consumer information provisions. Specifically, this proposes increases in maximum civil penalty amounts for single violations of motor vehicle safety requirements, a series of related violations of school bus and equipment safety requirements, a series of related violations of bumper standards, and a series of related violations of consumer information regarding crashworthiness and damage susceptibility requirements. This action would be taken pursuant to the Federal Civil Monetary Penalty Inflation Adjustment Act of 1990, as amended by the Debt Collection Improvement Act of 1996, which requires us to review and, as warranted, adjust penalties based on inflation at least every four years.
Decision That Certain Nonconforming Motor Vehicles Are Eligible for Importation
This document announces decisions by NHTSA that certain motor vehicles not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS) are eligible for importation into the United States because they are substantially similar to vehicles originally manufactured for sale in the United States and certified by their manufacturers as complying with the safety standards, and they are capable of being readily altered to conform to the standards or because they have safety features that comply with, or are capable of being altered to comply with, all applicable FMVSS.
Make Inoperative Exemptions; Retrofit On-Off Switches for Air Bags
NHTSA has a regulation that permits motor vehicle dealers and repair businesses to install retrofit on-off switches for air bags in vehicles owned by or used by persons whose request for a switch has been approved by the agency. This regulation is only available for motor vehicles manufactured before September 1, 2012. This document extends the availability of this regulation for three additional years, so that it applies to motor vehicles manufactured before September 1, 2015.
Petition for Exemption From the Vehicle Theft Prevention Standard; BMW of North America, LLC
This document grants in full the BMW of North America, LLC (BMW) petition for exemption of the Carline 4 vehicle line in accordance with 49 CFR Part 543, Exemption from the Theft Prevention Standard. This petition is granted because the agency has determined that the antitheft device to be placed on the line as standard equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Theft Prevention Standard (49 CFR part 541). BMW requested confidential treatment for specific information in its petition that the agency will address by separate letter.
Reports, Forms, and Recordkeeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatements of previously approved collections. This document describes one collection of information for which NHTSA intends to seek OMB approval.
Distracted Driving Grant Program
Pursuant to the recently enacted Moving Ahead for Progress in the 21st Century Act (MAP-21), the Department of Transportation (DOT) announces the availability of funding authorized in the amount of $17.525 million in Federal fiscal year (FY) 2013 funds to provide grants to States for enacting and enforcing distracted driving laws. The FY 2013 funds are subject to an annual obligation limitation that may be established in appropriations law. Therefore, the amount available for the grants in FY 2013 may be less than the amount identified above. A State's distracted driving law must meet statutorily-specified criteria in order for the State to receive a grant. States that are awarded grants also must follow post-award grant requirements. This notice describes the statutorily-specified criteria, the application requirements and the administrative requirements for the Distracted Driving Grant Program. The Department is publishing this notice to give States an opportunity to submit applications for the newly authorized distracted driving grants as soon as possible in FY 2013. Funds for this grant program are authorized beginning on October 1, 2012.
Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles
The National Highway Traffic Administration (NHTSA) is denying the petition of Plant Oil Powered Diesel Fuel Systems, Inc. (``POP Diesel'') to amend the final rules establishing fuel efficiency standards for medium- and heavy-duty vehicles. NHTSA does not believe that POP Diesel has set forth a basis for rulemaking. The agency disagrees with the petitioner's assertion that a failure to specifically consider pure vegetable oil, and technology to enable its usage, as a feasible technology in heavy-duty vehicles, led to the adoption of less stringent standards. NHTSA also disagrees with POP's assertion that the agency failed to adequately consider the rebound effect in setting the standards.
Petition for Exemption From the Vehicle Theft Prevention Standard; Mitsubishi Motors R&D of America, Inc.
This document grants in full the Mitsubishi Motors R&D of America, Inc.'s (Mitsubishi) petition for exemption of the Mitsubishi [confidential] vehicle line in accordance with 49 CFR part 543, Exemption from the Theft Prevention Standard. This petition is granted because the agency has determined that the antitheft device to be placed on the line as standard equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Theft Prevention Standard 49 CFR part 541, Federal Motor Vehicle Theft Prevention Standard. Mitsubishi requested [confidential] treatment for specific information in its petition. The agency will address Mitsubishi's request for [confidential] treatment by separate letter.
Federal Motor Vehicle Safety Standards; Motorcycle Brake Systems
This final rule amends the Federal motor vehicle safety standard (FMVSS) on motorcycle brake systems to add and update requirements and test procedures and to harmonize with a global technical regulation (GTR) for motorcycle brakes. The GTR was developed under the United Nations 1998 Global Agreement with the U.S. as an active participant, and it was derived from various motorcycle braking regulations from around the world, including the U.S. motorcycle brake systems standard. This final rule includes numerous modifications to the test procedures for motorcycle brake systems, but does not change the scope, applicability, and safety purpose of the motorcycle brake systems FMVSS.
Request for Comments on a Renewal Information Collection
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on March 28, 2012 (FR 77 18880). No comments were received.
Schedule of Fees Authorized
This document adopts fees for Fiscal Year 2013 and until further notice, as authorized by 49 U.S.C. 30141, relating to the registration of importers and the importation of motor vehicles not certified as conforming to the Federal motor vehicle safety standards (FMVSS). These fees are needed to maintain the registered importer (RI) program. We are increasing the fees for the registration of a new RI from $795 to $805 and the annual fee for renewing an existing registration from $670 to $676. The fee to reimburse Customs for conformance bond processing costs will decrease from $9.93 to $9.09 per bond. The fee for the review, processing, handling, and disbursement of cash deposits that are submitted in lieu of a conformance bond will decrease from $514 to $495. We are decreasing the fees for the importation of a vehicle covered by an import eligibility decision made on an individual model and model year basis. For vehicles determined eligible based on their substantial similarity to a U.S. certified vehicle, the fee will decrease from $158 to $101. For vehicles determined eligible based on their capability of being modified to comply with all applicable FMVSS, the fee will also decrease from $158 to $101. The fee for the inspection of a vehicle will remain $827. The fee for processing a conformity package will decrease from $17 to $12. If the vehicle has been entered electronically with Customs through the Automated Broker Interface (ABI) and the RI has an email address, the fee for processing the conformity package will continue to be $6, provided the fee is paid by credit card. If NHTSA finds that the information in the entry or the conformity package is incorrect, the processing fee will remain $57, representing the fee that is currently charged when there are one or more errors in the ABI entry or omissions in the statement of conformity.
Withdrawal of Proposed Rule on Insurer Reporting Requirements; List of Insurers Required To File Reports
This document withdraws a proposed rule published on May 14, 2012, that was intended to implement the requirements contained in Title 49 U.S.C. 33112 of the Insurer Reporting Requirements. This proposed rule required insurers to file reports on their motor vehicle theft loss experiences. An insurer included in any of the appendices that appeared in the proposed rule would be required to file three copies of its report for the 2009 calendar year before October 25, 2012. If the passenger motor vehicle insurers remain listed, they would submit reports by each subsequent October 25. Congress subsequently repealed Title 49 U.S.C. 33112 of the Insurer Reporting Requirements.
Reports, Forms, and Recordkeeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections. This document describes one collection of information for which NHTSA intends to seek OMB approval.
Petition for Approval of Alternate Odometer Requirements
The State of New York (``New York'') has petitioned for approval of alternate odometer requirements. New York's petition, as amended, is granted.
Petition for Approval of Alternate Odometer Disclosure Requirements
The State of Arizona has petitioned for approval of alternate requirements to certain requirements under Federal odometer law. NHTSA initially denies Arizona's petition. This notice is not a final agency action.
Proposed Traffic Records Program Assessment Advisory
This notice announces the publication of the Traffic Records Program Assessment Advisory, DOT HS 811 644, which provides guidance to States on the collection, management, and analysis of data used to inform highway and traffic safety decision-making. States need timely, accurate, complete, and uniform traffic records to identify and prioritize traffic safety issues and to choose appropriate countermeasures and evaluate their effectiveness. This document provides information on the contents, capabilities, and data quality attributes of an effective traffic records system, and includes assessment questions that qualified independent assessors can use to evaluate the capabilities of a State's traffic records system.
Federal Motor Vehicle Safety Standards; Motorcycle Helmets
This document responds to a petition for reconsideration of a final rule issued by this agency on May 13, 2011. The final rule amended the Federal Motor Vehicle Safety Standard for motorcycle helmets. Specifically, the final rule amended the helmet labeling requirements and compliance test procedures in order to make it more difficult to misleadingly label novelty helmets and to aid the agency in enforcing the standard. This document addresses issues raised in a petition for reconsideration relating to early compliance with the amended requirements.
Wheego Electric Cars, Inc.; Grant of Petition for Temporary Exemption From the Electronic Stability Control Requirements of FMVSS No. 126
This notice grants the petition of Wheego Electric Cars, Inc. (Wheego) for the temporary exemption of its LiFe model from the electronic stability control requirements of FMVSS No. 126. The agency has considered Wheego's petition for exemption and has determined that the exemption would facilitate the development or field evaluation of a low-emission motor vehicle and would not unreasonably reduce the safety level of that vehicle.
Reports, Forms and Recordkeeping Requirements Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collection and its expected burden. The Federal Register Notice with a 60-day comment period was published on May 30, 2012 [77 FR 31910]. No comments were received. This document describes the collection of information for which NHTSA intends to seek OMB approval. The collection of information described is the ``Roof Crush Resistance Phase in Reporting RequirementsPart 585.'' (OMB Control Number: 2127-XXXX)
Utilimaster Corporation, Denial of Petition for Decision of Inconsequential Noncompliance
Utilimaster Corporation (Utilimaster),\1\ has determined that certain model year 2009-2011 Utilimaster walk-in van-type trucks manufactured between September 1, 2009 and December 22, 2011 do not comply with paragraph S4.2.1 of Federal Motor Vehicle Safety Standard (FMVSS) No. 206, Door Locks and Door Retention Components. Utilimaster filed an appropriate report dated December 30, 2011, pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports.
Event Data Recorders
On August 5, 2011, the agency published a final rule amending the requirements for voluntarily installed event data recorders (EDRs) established in August 2006. In response to the August 2011 final rule, the agency received three petitions for reconsideration from the Alliance of Automobile Manufacturers, the Automotive Safety Council, and Honda Motor Co., LTD. The Association of Global Automakers, Inc. Technical Affairs Committee, and Nissan North America, Inc. both submitted comments in support of the petitioners' requests. After careful consideration, the agency is granting some aspects of the petitions, and denying others. This document amends the final rule accordingly.
General Motors, LLC, Receipt of Petition for Decision of Inconsequential Noncompliance
General Motors, LLC (GM) \1\ has determined that certain model year 2012; Cadillac SRX, Chevrolet Equinox, GMC Terrain and Saab 9-4x multipurpose passenger vehicles, and Chevrolet Cruze passenger cars, do not fully comply with paragraph S19.2.2 of Federal Motor Vehicle Safety Standard (FMVSS) No. 208, Occupant Crash Protection. GM has filed an appropriate report dated September 6, 2011, pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports.
Reports, Forms and Recordkeeping Requirements; Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on May 22, 2012 [Volume 77, No. 99, Page 30352].
Notice of Receipt of Petition for Decision That Nonconforming 2005 Chevrolet Suburban Multi-Purpose Passenger Vehicles are Eligible for Importation
This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 2005 Chevrolet Suburban multi-purpose passenger vehicles (MPV) that were not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS), are eligible for importation into the United States because they are substantially similar to vehicles that were originally manufactured for sale in the United States and that were certified by their manufacturer as complying with the safety standards (the U.S.-certified version of the 2005 Chevrolet Suburban MPV) and they are capable of being readily altered to conform to the standards.
National Emergency Medical Services Advisory Council (NEMSAC); Notice of Federal Advisory Committee Meeting
The NHTSA announces a meeting of NEMSAC to be held in the Metropolitan Washington, DC, area. This notice announces the date, time, and location of the meeting, which will be open to the public. The purpose of NEMSAC is to provide a nationally recognized council of emergency medical services representatives and consumers to provide advice and recommendations regarding Emergency Medical Services (EMS) to DOT's NHTSA and to the Federal Interagency Committee on EMS (FICEMS).
Vehicle Certification; Contents of Certification Labels
This document proposes to clarify the National Highway Traffic Safety Administration (NHTSA) regulations that prescribe the format and contents of certification labels that manufacturers are statutorily required to affix to motor vehicles manufactured for sale in the United States. The proposal would require specified language on the certification labels for certain types of vehicles.
Announcing the Twentieth Public Meeting of the Crash Injury Research and Engineering Network (CIREN)
This notice announces the Twentieth Public Meeting of members of the Crash Injury Research and Engineering Network. CIREN is a collaborative effort to conduct research on crashes and injuries at six Level I Trauma Centers across the United States linked by a computer network. The current CIREN model utilizes two types of centers, medical and engineering. Medical centers are based at Level I Trauma Centers that admit large numbers of people injured in motor vehicle crashes. These teams are led by trauma surgeons and emergency physicians and also include a crash investigator and project coordinator. Engineering centers are based at academic engineering laboratories that have experience in motor vehicle crash and human injury research. Engineering teams partner with trauma centers to enroll crash victims into the CIREN program. Engineering teams are led by mechanical engineers, typically trained in the area of impact biomechanics. Engineering teams also include trauma/emergency physicians, a crash investigator, and a project coordinator. Either type of team typically includes additional physicians and/or engineers, epidemiologists, nurses, and other researchers. The CIREN process combines prospective data collection with professional multidisciplinary analysis of medical and engineering evidence to determine injury causation in every crash investigation conducted. Researchers can review data and share expertise, which may lead to a better understanding of crash injury mechanisms and the design of safer vehicles. The six centers will give presentations on current research based on CIREN data. Topics include thoraco-lumbar fractures in frontal crashes, risk of pelvic fractures in motor vehicle collisions, trauma system adoption of Advanced Automatic Collision Notification (AACN) Systems, lower extremity injury patterns sustained in frontal crashes, evaluation of brain lesion location sustained in motor vehicle crashes, and major vascular injuries. The final agenda will be posted to the CIREN Web site that can be accessed by going to the NHTSA homepage https://www.nhtsa.dot.gov/, click on Vehicle Safety Research on the right side of the top toolbar, and then click on Crash Injury Research and Engineering Network (CIREN) in the box on the left. The agenda will be posted one week prior to the meeting.
Denial of Motor Vehicle Defect Petition and Petition for a Hearing
The Center for Auto Safety has petitioned NHTSA to open defect investigations on Model Year (MY) 2002-2004 Ford Escape and 2001-2004 Mazda Tribute vehicles with certain cruise control cables. The Center for Auto Safety has also petitioned for a hearing to address whether Ford Motor Company (Ford) and Mazda North American Operations (Mazda) met their obligations to notify owners and correct a defect in certain Ford Escape and Mazda Tribute vehicles. The petitions to open investigations are denied as moot and the petitions to conduct hearings are denied.
American Honda Motor Co., Inc., Grant of Petition for Decision of Inconsequential Noncompliance
American Honda Motor Co., Inc. (Honda), has determined that certain 2008 and 2009 model year Honda Civic Si model passenger cars when equipped with dealer accessory 18-inch diameter wheels do not fully comply with paragraph S4.2(a) of Federal Motor Vehicle Safety Standard (FMVSS) No. 138, Tire Pressure Monitoring Systems. Honda filed an appropriate report dated December 3, 2008, pursuant to 49 CFR part 573 Defect and Noncompliance Responsibility and Reports. Pursuant to 49 U.S.C. 30118(d) and 30120(h) and the rule implementing those provisions at 49 CFR Part 556, Honda has petitioned for an exemption from the notification and remedy requirements of 49 U.S.C. Chapter 301 on the basis that this noncompliance is inconsequential to motor vehicle safety. Notice of receipt of the petition was published, with a 30-day public comment period, on May 12, 2009 in the Federal Register (74 FR 22202). No comments were received. To view the petition, and supporting documents log onto the Federal Docket Management System (FDMS) Web site at: https:// www.regulations.gov/. Then follow the online search instructions to locate docket number ``NHTSA-2009-0084.'' For further information on this decision contact Mr. John Finneran, Office of Vehicle Safety Compliance, the National Highway Traffic Safety Administration (NHTSA), telephone (202)366-0645, facsimile (202) 366-5930. Vehicles involved: The exact number of vehicles involved is not known. However, a total of approximately 952 wheels, or 238 complete wheel sets, were sold to Honda dealerships by Honda between July, 2006 and September, 2008. These wheel sets were sold with a replacement tire pressure placard in accordance with FMVSS No. 110, indicating a tire inflation pressure of 250 kPa (36 PSI) for 215/40RZ18 tires having a load capacity rating of 85Y. Noncompliance: Honda explains that the noncompliance occurred because the recommended electronic method of updating the TPMS inflation pressure settings to accommodate proper installation of the subject optional wheel sets incorrectly informed technicians that the adjustments had been completed successfully. The result is that the TPMS inflation pressure warning threshold remains at the standard setting for the original equipment 17-inch wheels of not less than 175 kPa (25 PSI) for the standard recommended tire pressure of 230 kPa (33 PSI). The minimum allowable TPMS threshold for the 18-inch accessory wheels should be 190 kPa (27 PSI), based on the recommended pressure of 250 kPa (36 PSI) as indicated on the replacement tire pressure placard. As a result, the low tire pressure warning telltale required by S4.2(a) will not illuminate at the 27 PSI minimum allowable TPMS threshold necessitated by installation of the dealer accessory wheels and tires.
Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices, and Associated Equipment
This notice requests comments on a technical report which evaluates new approaches for the regulation of motor vehicle lighting performance. Since 1968, the lighting standard in the United States has been updated incrementally, while lighting technologies have in some ways changed dramatically. We are requesting comments on the general approaches and specific technical merits presented in this report. These comments, in conjunction with the agency's overall priorities, will be used to shape our next steps.
Group Lotus Plc, Receipt of Petition for Temporary Exemption From an Advanced Air Bag Requirement of FMVSS No. 208
In accordance with the procedures in 49 CFR part 555, Group Lotus Plc has petitioned the agency for a temporary exemption from one advanced air bag requirement of FMVSS No. 208, the higher maximum speed (56 km/h (35 mph)) belted test requirement using 5th percentile adult female dummies for its Evora model. The basis for the application is that the petitioner avers compliance would cause it substantial economic hardship and that it has tried in good faith to comply with the standard.\1\ This notice of receipt of an application for a temporary exemption is published in accordance with statutory and administrative provisions. NHTSA has made no judgment on the merits of the application.
Advanced Braking Technologies That Rely on Forward-Looking Sensors; Request for Comments
The National Highway Traffic Safety Administration (NHTSA) has, for about two years, been studying advanced braking technologies that rely on forward-looking sensors to supplement driver braking or to actuate automatic braking in response to an impending crash. NHTSA believes these technologies show promise for enhancing vehicle safety by helping drivers to avoid crashes or mitigate the severity and effects of crashes. NHTSA is soliciting comments on the results of its research thus far to help guide its continued efforts in this area.
Public Hearing on Proposed Rule for Heavy Vehicle Electronic Stability Control Systems
On May 23, 2012, NHTSA published a notice of proposed rulemaking (NPRM) to require the installation of electronic stability control (ESC) systems on truck tractors and large buses. NHTSA is announcing a public hearing to provide an opportunity for the public to present oral testimony regarding the proposal. The oral testimony provided at the public hearing will be transcribed and placed in the docket for this rulemaking.
Information Collection Activities: Submission for the Office of Management and Budget (OMB) Review; Request for Comment
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) abstracted below will be submitted to the Office of Management and Budget (OMB) for review. The ICR describes the nature of the information collection and its expected burden.
Mercedes-Benz USA, LLC, and Daimler AG (DAG), Receipt of Petition for Decision of Inconsequential Noncompliance
Mercedes-Benz USA, LLC \1\ (MBUSA) and its parent company Daimler AG (DAG)(collectively referred to as ``MB'') have determined that certain model year 2011 and 2012 Mercedes-Benz S-Class (221 platform) passenger cars do not fully comply with paragraph S4.4 TPMS Malfunction of Federal Motor Vehicle Safety Standard (FMVSS) No. 138, Tire Pressure Monitoring Systems. MB has filed an appropriate report pursuant to 49 CFR Part 573, Defect and Noncompliance Responsibility and Reports (dated September 30, 2011).
Preliminary Theft Data; Motor Vehicle Theft Prevention Standard
This document requests comments on data about passenger motor vehicle thefts that occurred in calendar year (CY) 2010 including theft rates for existing passenger motor vehicle lines manufactured in model year (MY) 2010. The preliminary theft data indicate that the vehicle theft rate for CY/MY 2010 vehicles (1.17 thefts per thousand vehicles) decreased by 12.03 percent from the theft rate for CY/MY 2009 vehicles (1.33 thefts per thousand vehicles). Publication of these data fulfills NHTSA's statutory obligation to periodically obtain accurate and timely theft data, and publish the information for review and comment.
Vision Motor Cars, Inc.; Receipt of Petition for Temporary Exemption From Certain Requirements of FMVSS No. 126, FMVSS No. 201, and FMVSS No. 208
In accordance with the procedures in 49 CFR part 555, Vision Motor Cars, Inc., (VMCI) has petitioned the agency for temporary exemption from certain requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 126, Electronic Stability Control Systems, FMVSS No. 201, Occupant Protection in Interior Impact, and FMVSS No. 208, Occupant Crash Protection. The basis for the application is that the petitioner avers that compliance would cause it substantial economic hardship and that it has tried in good faith to comply with the standards.\1\ This notice of receipt of an application for a temporary exemption is published in accordance with statutory and administrative provisions. NHTSA has made no judgment on the merits of the application.
Guizhou Tyre Corporation; Receipt of Petition for Decision of Inconsequential Noncompliance
GTC North America, Inc., on behalf of Guizhou Tyre I/E Co. LTD (collectively referred to as ``GTC'') has determined that certain Samson and Advance brand ST trailer Tires, do not fully comply with paragraph S6.5 (j) of Federal Motor Vehicle Safety Standard (FMVSS) No. 119, New pneumatic tires for motor vehicles with a GVWR of more than 4,536 kilograms (10,000 pounds) and motorcycles. GTC has filed an appropriate report dated March 22, 2012, pursuant to 49 CFR Part 573, Defect and Noncompliance Responsibility and Reports. Pursuant to 49 U.S.C. 30118(d) and 30120(h) (see implementing rule at 49 CFR Part 556), GTC submitted a petition for an exemption from the notification and remedy requirements of 49 U.S.C. Chapter 301 on the basis that this noncompliance is inconsequential to motor vehicle safety. This notice of receipt of GTC's petition is published under 49 U.S.C. 30118 and 30120 and does not represent any agency decision or other exercise of judgment concerning the merits of the petition. Equipment involved: Affected are approximately 4,291 size ST235/ 85R16/14 ply Samson and Advance brand ST Trailer Tires manufactured from December 4, 2011 through March 31, 2012. NHTSA notes that the statutory provisions (49 U.S.C. 30118(d) and 30120(h)) that permit manufacturers to file petitions for a determination of inconsequentiality allow NHTSA to exempt manufacturers only from the duties found in sections 30118 and 30120, respectively, to notify owners, purchasers, and dealers of a defect or noncompliance and to remedy the defect or noncompliance. Therefore, these provisions only apply to the subject 4,291 \1\ tires that GTC no longer controlled at the time it determined that the noncompliance existed.
BMW of North America, LLC, a Subsidiary of BMW AG; Receipt of Petition for Decision of Inconsequential Noncompliance
BMW of North America, LLC,\1\ a subsidiary of BMW AG,\2\ has determined that certain model year 2012 BMW X6M SAV multipurpose passenger vehicles (MPV) manufactured between April 1, 2011 and March 23, 2012, do not fully comply with paragraph S4.3(b) of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, Tire selection and rims and motor home/recreation vehicle trailer load carrying capacity information for motor vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less. BMW has filed an appropriate report dated April 4, 2012, pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports.
Request for Public Comment on Proposed Collections of Information
In compliance with the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3501 et seq.), on March 30, 2011 (76 FR 17746) the agency published a 60-day notice in the Federal Register soliciting public comment on the proposed information collection abstracted below. On January 17, 2012 (77 FR 2344), the agency published a second notice in the Federal Register. In further compliance with the PRA, the agency now publishes this 30-day notice announcing the submission of its proposed collection to OMB for review and notifying the public about how to submit comments on the collection to OMB during the 30-day comment period.
Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.)
In compliance with the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3501 et seq.), on June 24, 2011 (76 FR 37189) the agency published a 60-day notice in the Federal Register soliciting public comment on the proposed information collection abstracted below. In further compliance with the PRA, the agency now publishes this second notice announcing the submission of its proposed collection to the Office of Management and Budget (OMB) for review and notifying the public about how to submit comments on the proposed collection to OMB during the 30-day comment period.
Amendments to Highway Safety Program Guidelines
Section 402 of title 23 of the United States Code requires the Secretary of Transportation to promulgate uniform guidelines for State highway safety programs. The National Highway Traffic Safety Administration (NHTSA) is seeking comments on proposed amendments to five (5) guidelines and one (1) new guideline that reflect program methodologies and approaches that have proven to be successful and are based on sound science and program administration. The guidelines the agency proposes to revise are: Guideline No. 1 Periodic Motor Vehicle Inspection, Guideline No. 2 Motor Vehicle Registration, Guideline No. 6 Codes and Laws, Guideline No. 16 Management of Highway Incidents (formerly Debris Hazard Control and Cleanup), and Guideline No. 18 Motor Vehicle Crash Investigation and Incident Reporting (formerly Accident Investigation and Reporting). The new guideline is No. 13 Older Driver Safety. NHTSA believes the proposed amendments and new guideline will provide more accurate, current and effective guidance to the States. The guidelines will be made publicly available on the NHTSA Web site.
Petition for Approval of Alternate Odometer Requirements
The State of Florida (``Florida'') has petitioned for approval of alternate odometer requirements. Florida's petition \1\ is granted as to vehicle transfers involving casual or private sales, and Florida's petition is denied as to sales involving licensed dealers and sales of leased vehicles.
Federal Interagency Committee on Emergency Medical Services
NHTSA announces a meeting of the Federal Interagency Committee on Emergency Medical Services (FICEMS) to be held in the Washington, DC area. This notice announces the date, time and location of the meeting, which will be open to the public. Pre-registration is required to attend.
Highway Safety Programs; Conforming Products List of Screening Devices To Measure Alcohol in Bodily Fluids
This notice updates the Conforming Products List (CPL) published in the Federal Register on December 15, 2009 (74 FR 66398) for instruments that conform to the Model Specifications for Screening Devices to Measure Alcohol in Bodily Fluids dated, March 31, 2008 (73 FR 16956).
Highway Safety Programs; Conforming Products List of Evidential Breath Alcohol Measurement Devices
This notice updates the Conforming Products List (CPL) published in the Federal Register on March 11, 2010 (75 FR 11624) for instruments that conform to the Model Specifications for Evidential Breath Alcohol Measurement Devices dated, September 17, 1993 (58 FR 48705).
Reports, Forms, and Recordkeeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatements of previously approved collections. This document describes an Information Collection Request (ICR) for which NHTSA intends to seek OMB approval.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
