Federal Aviation Administration December 30, 2020 – Federal Register Recent Federal Regulation Documents
Results 1 - 4 of 4
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by a report that during the assembly of a certain section of the fuselage, the gaps found on self-aligning nuts for eight fasteners were out of tolerance. This AD requires a rotating probe test of all fastener holes located in the affected area for any discrepancies, an eddy current inspection of the surrounding flange for any discrepancies, a detailed inspection of certain frames for any discrepancies, and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a report that during installation on the final assembly line, a foreign object damage (FOD) protective end cap was not removed from an extraction duct of the crew oxygen system. The protective end cap must be removed to prevent a build-up of oxygen under the flight deck floor, which is a fire risk. This AD requires inspecting the air extraction duct installation to determine if a protective end cap is installed, and removing any protective end cap found. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-243, -343, and -941 airplanes. This AD was prompted by a report that during an inspection of the wing/fuselage fillet interface, evidence of black stains and white oxidation was found on several areas of the fillet fairing adjustable rods due to surface corrosion. This AD requires replacing each affected fillet fairing adjustable rod with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200CB, and -300 series airplanes. This proposed AD was prompted by a report indicating the passenger service units (PSUs) and life vest panels became separated from their attachments during several survivable accident sequences. This proposed AD would require installing lanyard assemblies on the PSUs, and, for certain airplanes, on the life vest panels and video panels as applicable. The FAA is proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
