Federal Aviation Administration September 2020 – Federal Register Recent Federal Regulation Documents

Results 101 - 119 of 119
Termination of Previously Initiated Processes for the Development of Air Tour Management Plans and Environmental Assessments/Environmental Impact Statements for Various National Park Units and Notice of Intent To Complete Air Tour Management Plans at 23 National Park Units
Document Number: 2020-19490
Type: Notice
Date: 2020-09-03
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA), in cooperation with the National Park Service (NPS), announces that it is terminating previously initiated processes for the development of Air Tour Management Plans (ATMP) and Environmental Assessments (EA)/ Environmental Impact Statements (EIS) for a number of National Park System units. The agencies had initiated and actively worked these processes at a number of parks from 2004 to 2011 but ceased all work by September 2012 due to a focus on other program priorities. Given the length of time since these processes were initiated and actively worked, termination of these processes will allow the agencies to start anew with the development of ATMPs and associated environmental documents at these and other parks.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2020-19425
Type: Rule
Date: 2020-09-03
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2020-19424
Type: Rule
Date: 2020-09-03
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2020-19402
Type: Rule
Date: 2020-09-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by the results of laboratory tests on non-rechargeable lithium batteries installed in certain emergency locator transmitters (ELTs), which highlighted a lack of protection against current injections of 28 volts direct current (DC) or 115 volts alternating current (AC) that could lead to thermal runaway and a battery fire. This AD requires modifying a certain ELT by installing a diode between the ELT and the terminal block, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2020-19401
Type: Rule
Date: 2020-09-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, - 113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, - 131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by a report that cracks were detected on the left-hand (LH) and right- hand (RH) sides of the first rivet hole of the frame (FR) 43 foot coupling during scheduled maintenance. This AD requires a rotating probe test of the fastener holes at FR43 on the LH and RH sides for any cracking, and on-condition actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2020-19390
Type: Rule
Date: 2020-09-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-202, -203, -223, -243, -301, -321, -322, -323, -341, -342, and -343 airplanes; and Model A340-200 and -300 series airplanes. This AD was prompted by a report indicating that the allowable load limits on the vertical tail plane could be reached and possibly exceeded in cases of multiple rudder doublet inputs. This AD requires upgrading the flight control data concentrator (FCDC), associated flight control primary computer (FCPC), and flight warning computer (FWC), and activation of the stop rudder input aural warning (SRIW) device, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2020-19389
Type: Rule
Date: 2020-09-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Dassault Aviation Model Falcon 10 airplanes. This AD was prompted by a report of hydraulic fluid on the ground near the main landing gear (MLG) brake assembly. The hydraulic leakage started in a cracked hydraulic pipe, with the crack likely due to chafing between two hydraulic pipes or between hydraulic pipes and structure. This AD requires an inspection for chafing or interference of certain hydraulic pipes and certain rib passage holes, and, depending on findings, modification or repair, as specified in a European Union Aviation Safety Agency (EASA), which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2020-19387
Type: Rule
Date: 2020-09-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 and 787-9 airplanes. This AD was prompted by reports that the cabin air compressor (CAC) outlet check valve failed due to fatigue of the aluminum flappers, and exposed the Y-duct to temperatures above its design limit. This AD requires installing new inboard and outboard CAC outlet check valves on the left-side and right-side cabin air conditioning and temperature control system (CACTCS) packs. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2020-19386
Type: Rule
Date: 2020-09-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a report of a slat system jam during landing. This AD requires a one- time health check of the slat power control unit (PCU) torque sensing unit (TSU) for discrepancies, and corrective actions if necessary; a detailed inspection of the left-hand (LH) and right-hand (RH) slat transmission systems for discrepancies, and corrective actions if necessary; and LH and RH track 12 slat gear rotary actuator (SGRA) water drainage and vent plug cleaning (which includes an inspection for moisture), as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pratt & Whitney Canada Corp. Turboshaft Engines
Document Number: 2020-19299
Type: Rule
Date: 2020-09-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Pratt & Whitney Canada Corp. (P&WC) PT6B-37A model turboshaft engines with engine serial number PCE-PU0289 and earlier. This AD was prompted by a report of contamination from galvanic corrosion between the fuel control unit (FCU) aluminum body and the steel union fitting causing the loss of engine control, resulting in an engine over-speed condition and subsequent in-flight shutdown (IFSD). This AD requires replacing the FCU with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
Document Number: 2020-19264
Type: Proposed Rule
Date: 2020-09-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for Pilatus Aircraft Ltd. Model PC-24 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as overheating of the electrical wiring splices close to the right-hand pitot-static connector on frame 10. The FAA is proposing this AD to require actions to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Aviation Research Grants Program
Document Number: 2020-19243
Type: Notice
Date: 2020-09-01
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on April 17, 2020. The collection involves information to be collected will be used to and/or is necessary for the purpose of the review, and administration of grants in accordance with applicable Government-wide, and Agency regulations, policies, and procedures.
Petition for Exemption; Summary of Petition Received; National Air Transportation Association (NATA)
Document Number: 2020-19226
Type: Notice
Date: 2020-09-01
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Soaring Society of America
Document Number: 2020-19225
Type: Notice
Date: 2020-09-01
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; National Air Transportation Association (NATA)
Document Number: 2020-19224
Type: Notice
Date: 2020-09-01
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Bald Mountain Air Service
Document Number: 2020-19223
Type: Notice
Date: 2020-09-01
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Verification of Authenticity of Foreign License, Rating, and Medical Certification
Document Number: 2020-19187
Type: Notice
Date: 2020-09-01
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on 04/15/2020. The information is used to identify foreign airmen in order to allow the agency to verify their foreign license when used to qualify for a US certificate. Respondents are holders of foreign licenses wishing to obtain US Certificates.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2020-19099
Type: Proposed Rule
Date: 2020-09-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A300 series airplanes, and Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4- 605R Variant F airplanes (collectively called Model A300-600 series airplanes). This proposed AD was prompted by reports of cracking at a certain hole location on the left-hand (LH) side of a certain frame (FR). This proposed AD would require repetitive inspections for discrepancies of certain areas in and around the fuselage, as specified in two European Union Aviation Safety Agency (EASA) ADs, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Amendment and Removal of Air Traffic Service (ATS) Routes; Eastern United States
Document Number: 2020-19082
Type: Rule
Date: 2020-09-01
Agency: Federal Aviation Administration, Department of Transportation
This action amends 6 jet routes, removes 4 jet routes, and removes 1 high altitude area navigation (RNAV) route in the eastern United States. This action is in support of the Northeast Corridor Atlantic Coast Route Project to improve the efficiency of the National Airspace System (NAS) and reduce dependency on ground-based navigational systems.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.