Federal Aviation Administration December 12, 2019 – Federal Register Recent Federal Regulation Documents

Petition for Exemption; Summary of Petition Received; Daniel Orcutt
Document Number: 2019-26805
Type: Notice
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
Document Number: 2019-26738
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2019-26736
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-300, -400, -500, -600, -700, -700C, -800, -900, and -900ER series airplanes; Model 757 series airplanes; Model 767 series airplanes; Model 777 series airplanes; and Model 787-8 and 787-9 airplanes. This AD was prompted by reports of fuel crossfeed valves failing to open when activated during flight. This AD requires, for certain airplanes, revising the existing airplane flight manual (AFM); and for certain other airplanes, revising the existing minimum equipment list (MEL) to do an operational check of the fuel crossfeed valve prior to each extended operations (ETOPS) flight if one fuel crossfeed valve (or the fuel balancing system on Model 787 airplanes) is inoperative. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2019-26734
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by reports that the nose landing gear (NLG) retracted on the ground, with weight on the airplane's wheels, due to the incorrect installation of an NLG downlock pin in the apex pin inner bore of the NLG lock link assembly. This AD requires installing an insert to prevent installation of the pin in the incorrect location. The FAA is issuing this AD to address the unsafe condition on these products.
Special Conditions: VT DRB Aviation Consultants, Airbus Model A330-300 Airplanes; Dynamic Test Requirements for Single-Occupant, Oblique (Side-Facing) Seats With or Without Airbag Devices or 3-Point Restraints
Document Number: 2019-26722
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Airbus Model A330- 300 airplane. This airplane, as modified by VT DRB Aviation Consultants (VT DRB), will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is single-occupant, oblique (side-facing) seats with airbag devices or 3-point restraints. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives: The Boeing Company Airplanes
Document Number: 2019-26708
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-200B, 747-200C, 747-200F, 747-300, 747- 400, 747-400D, 747-400F, 747-8F, and 747-8 series airplanes. This AD was prompted by reports of uncommanded fore and aft movement of the Captain's and First Officer's seats. This AD requires, for the Captain's and First Officer's seats, repetitive horizontal actuator identifications, repetitive checks of the horizontal movement system (HMS), a detailed inspection of the HMS for certain airplanes, and applicable on-condition actions. This AD also requires an inspection to determine the part number and, if applicable, the serial number of the Captain's and First Officer's seats, and applicable on-condition actions. This AD also provides an optional terminating action for the repetitive actions for certain seats. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2019-26704
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 900EX and Model FALCON 2000EX airplanes. This AD was prompted by reports of iced angle-of-attack (AoA) probes after take-off, with associated misleading airspeed indication and/or misleading stall warning. This AD requires revising the existing airplane flight manual (AFM) to provide the flightcrew with updated procedures related to manually activating heating of the AoA probes during line up, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-26703
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A320-251N and A321-253N airplanes. This AD was prompted by reports of cracks on the pylon block seals. This AD requires replacement of the pylon block seals, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Application for Employment With the Federal Aviation Administration
Document Number: 2019-26702
Type: Notice
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on July 9, 2019. The collection involves an automated application process for employment with the Federal Aviation Administration. Applicants access an online form that is presented with requests for certain information. The information collected is necessary to determine basic eligibility for employment and potential eligibility for Veteran's Preference, Veteran's Readjustment Act, and People with Disability appointments. In addition, there are specific occupation questions that assist the FAA Office of Human Resource Management (AHR) in determining candidates' qualifications in order that the best-qualified candidates are hired for the many FAA occupations.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-26615
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-26611
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Amendment of Class D and E Airspace; Alpena, MI
Document Number: 2019-26610
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Class D airspace, the Class E surface airspace, the Class E airspace designated as an extension to Class D and Class E surface airspace, and the Class E airspace extending upward from 700 feet above the surface at Alpena County Regional Airport, Alpena, MI. This action is due to an airspace review caused by the decommissioning of the Au Sable VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. The name of MidMichigan Medical Center-Alpena, Alpena MI, is also being updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Amendment of Class D and E Airspace and Establishment of Class E Airspace; La Crosse, WI
Document Number: 2019-26609
Type: Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Class D airspace, the Class E surface airspace, and the Class E airspace extending upward from 700 feet above the surface, and establishes a Class E airspace area designated as an extension to Class D and Class E surface areas at La Crosse Regional Airport, La Crosse, WI. This action is due to an airspace review caused by the decommissioning of the La Crosse VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. The geographic coordinates of the La Crosse Regional Airport and the name of La Crosse Regional Airport and Mayo Clinic Health System-Franciscan Healthcare, La Crosse, WI, are also being updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Proposed Amendment of Class D Airspace and Amendment and Revocation of the Class E Airspace; Multiple Texas Towns
Document Number: 2019-26608
Type: Proposed Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class D airspace at Conroe-North Houston Regional Airport, Conroe, TX; Scholes International Airport at Galveston, Galveston, TX; and Sugar Land Regional Airport, Houston, TX; amend Class E surface airspace at Conroe-North Houston Regional Airport, Scholes International Airport at Galveston, and Sugar Land Regional Airport; revoke the Class E airspace designated as an extension to a Class E surface area at Draughon-Miller Central Texas Regional Airport, Temple, TX; amend the Class E airspace extending upward from 700 feet above the surface at Chambers County Airport, Anahuac, TX; Scholes International Airport at Galveston; Conroe-North Houston Regional Airport; Texas Gulf Coast Regional Airport, Angleton/ Lake Jackson, TX; and Draughon-Miller Central Texas Regional Airport; and remove Class E airspace extending upward from 700 feet above the surface at Wood No. 2 Airport, Brookshire, TX, and Covey Trails Airport, Fulshear, TX, which are contained within the Houston, TX, airspace legal description. The FAA is proposing this action as the result of the decommissioning of the Hobby and Temple VHF omnidirectional range (VOR) navigation aids, which provided navigation information for the instrument procedures at these airports, as part of the VOR Minimum Operational Network (MON) Program. The geographic coordinates of Conroe-North Houston Regional Airport, Chambers County Airport, and Texas Gulf Coast Regional Airport, and the names of Conroe-North Houston Regional Airport, Scholes International Airport at Galveston, and Texas Gulf Coast Regional Airport would also be updated to coincide with the FAA's aeronautical database.
Proposed Amendment of Class E Airspace; Shawnee, OK
Document Number: 2019-26607
Type: Proposed Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class E airspace extending upward from 700 feet above the surface at Chandler Regional Airport, Chandler, OK, and Cushing Municipal Airport, Cushing, OK, which are contained within the Shawnee, OK, airspace legal description. The FAA is proposing this action as the result of the decommissioning of the Tilghman and Cushing non-directional beacons (NDB), which provided navigation information for the instrument procedures at these airports.
Proposed Establishment of Multiple Air Traffic Service (ATS) Routes; Hawaiian Islands
Document Number: 2019-26604
Type: Proposed Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish four United States Area Navigation (RNAV) ATS routes (T-340, T-342, T-344, and T-346) in the Hawaiian Islands. The proposed RNAV ATS routes will facilitate the movement of aircraft among the Hawaiian Islands and will promote operational efficiencies to current and proposed RNAV Standard Instrument Departures (SID) and RNAV Standard Terminal Arrival Routes (STAR), which will enhance the capacity for Hawaiian airports.
Proposed Amendment of VOR Federal Airways V-18, V-54, V-114, and V-583 in the Vicinity of Quitman, TX
Document Number: 2019-26603
Type: Proposed Rule
Date: 2019-12-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend four VHF Omnidirectional Range (VOR) Federal airways, V-18, V-54, V-114, and V-583, in the vicinity of Quitman, TX. The modifications are necessary due to the planned decommissioning of the VOR portion of the Quitman, TX, VOR/Distance Measuring Equipment (VOR/DME) navigation aid (NAVAID), which provides navigation guidance for portions of the affected air traffic service (ATS) route. The Quitman VOR is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.