Federal Aviation Administration June 2017 – Federal Register Recent Federal Regulation Documents

Results 51 - 100 of 184
Airworthiness Directives; Bell Helicopter Textron Canada Limited Helicopters
Document Number: 2017-12799
Type: Rule
Date: 2017-06-22
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Canada Limited (Bell) Model 429 helicopters. This AD requires adding an identification number to life-limited rod ends that do not have a serial number (S/N). The actions of this AD are intended to address an unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-12631
Type: Rule
Date: 2017-06-22
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-300, -400, and -500 series airplanes. This AD was prompted by a report of a crack in a certain body station (BS) frame inboard chord during supplemental structural inspection document (SSID) inspections. This AD requires repetitive detailed and high frequency eddy current (HFEC) inspections for any crack at the frame inboard chords, and repair if necessary. We are issuing this AD to address the unsafe condition on these products.
Fiftieth RTCA SC-224 Standards for Airport Security Access Control Systems Plenary
Document Number: 2017-12854
Type: Notice
Date: 2017-06-21
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Fiftieth RTCA SC-224 Standards for Airport Security Access Control Systems Plenary.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-12803
Type: Proposed Rule
Date: 2017-06-21
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model DHC-8-400 series airplanes. This proposed AD was prompted by reports that operation of fuselage doors was interrupted due to corrosion in certain door roller bearings. This proposed AD would require a one-time detailed inspection of the bearings for corrosion, and replacement if necessary. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-12798
Type: Proposed Rule
Date: 2017-06-21
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), Model CL-600-2D15 (Regional Jet Series 705), Model CL-600- 2D24 (Regional Jet Series 900), and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This proposed AD was prompted by a report that a number of rubber bull gear (RBG) wheels installed in the horizontal stabilizer trim actuator (HSTA) were manufactured using an incorrect material specification. This proposed AD would require replacement of the affected RBG wheels. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Document Number: 2017-12794
Type: Proposed Rule
Date: 2017-06-21
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Saab AB, Saab Aeronautics Model 340A (SAAB/SF340A) and SAAB 340B airplanes. This proposed AD was prompted by the determination that new inspection tasks for the drag brace support fitting of the main landing gear (MLG) and corrosion prevention and control program (CPCP) related tasks are necessary. This proposed AD would require revising the maintenance or inspection program, as applicable, to incorporate airworthiness limitations, including new inspection tasks for the drag brace support fitting of the MLG and to implement CPCP related tasks. We are proposing this AD to address the unsafe condition on these products.
Modification of VOR Federal Airways V-55, V-63, V-177, V-228, and V-246 in the Vicinity of Stevens Point, WI
Document Number: 2017-12716
Type: Rule
Date: 2017-06-21
Agency: Federal Aviation Administration, Department of Transportation
This action modifies five VHF Omnidirectional Range (VOR) Federal airways in the vicinity of Stevens Point, WI. The FAA is taking this action due to the planned decommissioning of the Stevens Point, WI (STE), VHF Omnidirectional Range/Tactical Air Navigation (VORTAC) navigation aid (NAVAID) which provides navigation guidance for portions of the ATS routes amended by this action. This action will enhance the safe and efficient management of aircraft in the Stevens Point, WI, area.
Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
Document Number: 2017-12630
Type: Proposed Rule
Date: 2017-06-21
Agency: Federal Aviation Administration, Department of Transportation
We are revising an earlier proposal for all Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235-200, and CN-235-300 airplanes; and Model C-295 airplanes. This action revises the notice of proposed rulemaking (NPRM) by reducing a certain compliance time, adding repetitive inspections and operational checks of the affected fuel valves, and providing corrective action if necessary. We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions impose an additional burden over those proposed in the NPRM we are reopening the comment period to allow the public the chance to comment on these changes.
Tenth RTCA SC-233 Plenary
Document Number: 2017-12852
Type: Notice
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Tenth RTCA SC-233 Plenary
Forty Seventh RTCA SC206 Aeronautical Information and Meteorological Data Link Services Plenary
Document Number: 2017-12843
Type: Notice
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Forty Seventh RTCA SC206 Aeronautical Information and Meteorological Data Link Services Plenary.
Amendment of and Establishment of Air Traffic Service (ATS) Routes; Northcentral United States
Document Number: 2017-12713
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This action modifies one jet route (J-25) and five VHF Omnidirectional Range (VOR) Federal airways (V-55, V-82, V-161, V-218, and V-413), and establishes three Area Navigation (RNAV) T-routes (T- 330, T-354, and T-383) in the northcentral United States. The FAA is taking this action due to the planned decommissioning of the Brainerd, MN (BRD), VHF Omnidirectional Range/Tactical Air Navigation (VORTAC) navigation aid (NAVAID), which provides navigation guidance for portions of the ATS routes amended by this action. The RNAV T-routes established by this action mitigate potential issues to the National Airspace System (NAS) route structure caused by the Jet route and VOR Federal airway amendments. This action enhances the safe and efficient management of aircraft operating within the NAS.
Proposed Amendment of Class E Airspace; Greenwood/Wonder Lake, IL
Document Number: 2017-12711
Type: Proposed Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Galt Field Airport, Greenwood/Wonder Lake, IL. The FAA is proposing this action due to the decommissioning of the Kenosha VHF omnidirectional range (VOR) facility. The VOR is being decommissioned as part of the VOR Minimum Operational Network (MON) Program, which provided navigation guidance for the instrument procedures to the airport. This action would enhance the safety and management of instrument flight rules (IFR) operations at this airport. Additionally, the geographic coordinates of the airport would be adjusted to coincide with the FAA's aeronautical database.
Amendment of Class E Airspace; Eugene, OR
Document Number: 2017-12708
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This action amends the legal description of Class E surface area airspace at Mahlon Sweet Field Airport, Eugene, OR, adding the Notice to Airmen (NOTAM) part-time status. This action does not affect the charted boundaries or operating requirements of the airspace.
Establishment of Class E Airspace; Grayling, AK
Document Number: 2017-12706
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace extending upward from 700 feet above the surface at Grayling Airport, AK, to support the development of instrument flight rules (IFR) operations under standard instrument approach and departure procedures at the airport, and for the safety and management of aircraft within the National Airspace System.
Proposed Amendment of Class E Airspace; Canadian, TX; and Wheeler, TX
Document Number: 2017-12704
Type: Proposed Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Hemphill County Airport, Canadian, TX, and Wheeler Municipal Airport, Wheeler, TX. The FAA is proposing this action due to the decommissioning of the Sayre co- located VHF omnidirectional range and tactical air navigation system (VORTAC) facility, which provided navigation guidance for the instrument procedures to these airports. The VORTAC is being decommissioned as part of the VHF omnidirectional range (VOR) Minimum Operational Network (MON) Program. This action would enhance the safety and management of instrument flight rules (IFR) operations at these airports. Additionally, the geographic coordinates of the airports would be adjusted to coincide with the FAA's aeronautical database.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-12614
Type: Proposed Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2001-16- 01, which applies to certain Airbus Model A330-301, -321, -322, -341, and -342 airplanes, and certain Model A340 series airplanes; and AD 2014-17-06, which applies to all Airbus Model A330-200 series airplanes, Model A330-200 Freighter series airplanes, and Model A330- 300 series airplanes. AD 2001-16-01 requires inspections for cracking of the aft cargo compartment door, and corrective action if necessary. AD 2014-17-06 requires revising the maintenance or inspection program, as applicable, to incorporate structural inspection requirements. Since we issued AD 2001-16-01 and AD 2014-17-06, we have determined that more restrictive maintenance instructions and airworthiness limitations are necessary. This proposed AD would require revising the maintenance or inspection program, as applicable, to incorporate new or revised airworthiness limitation requirements; and remove airplanes from the applicability. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-12613
Type: Proposed Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A310-203, -204, -221, -222, -304, -322, -324, and -325 airplanes. This proposed AD was prompted by reports of cracking in the drainage holes on the lower skin panel in the center wing box between frames (FR) 42 and FR 46. This proposed AD would require repetitive rotating probe inspections for cracking of the trellis boom drainage holes, the holes in the stringers bottom, and the holes of the inner pump, and corrective actions if necessary. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-12612
Type: Proposed Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP airplanes. This proposed AD was prompted by a report of damage found at the lower trailing edge panels of the left wing and a broken fuse pin of the landing gear beam end fitting. This proposed AD would require repetitive replacement or inspection of certain fuse pins, and applicable on-condition actions. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Honeywell International Inc. Turbofan Engines
Document Number: 2017-12561
Type: Proposed Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Honeywell International Inc. (Honeywell) AS907-1-1A turbofan engines. This proposed AD was prompted by reports of loss of power due to failure of the second stage low-pressure turbine (LPT2) blade. This proposed AD would require a one-time inspection of the LPT2 blades and, if the blades fail the inspection, the replacement of the blades with a part eligible for installation. We are proposing this AD to correct the unsafe condition on these products.
Establishment of Class E Airspace, Sacramento, CA
Document Number: 2017-12550
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E en route airspace extending upward from 1,200 feet above the surface to accommodate instrument flight rules (IFR) aircraft under control of the Oakland Air Route Traffic Control Center (ARTCC), centered near Sacramento, CA. Establishment of this airspace area is necessary to ensure controlled airspace exists in those areas where the Federal airway structure is inadequate.
Airworthiness Directives; Textron Aviation Inc. Airplanes
Document Number: 2017-12512
Type: Proposed Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Textron Aviation Inc. Model 390 airplanes (type certificate previously held by Beechcraft Corporation). This proposed AD was prompted by reports of hydraulic fluid loss from the engine driven pumps (EDPs) on three different airplanes. This proposed AD would require an inspection to determine if an affected EDP is installed with replacement as necessary. We are proposing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2017-12465
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2017-12464
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2017-12463
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2017-12462
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-12397
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200 and -200PF series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain areas of the frame webs are subject to widespread fatigue damage (WFD). This AD requires inspections of the frame webs for any crack of any open coordinating holes, tooling holes, and insulation blanket attachment holes; repair if necessary; and modification of the frame webs at all open hole locations, which would terminate the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-12396
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD requires revising the airplane flight manual (AFM) to provide procedures to stabilize the airplane's airspeed and attitude. This AD was prompted by two in-service incidents of loss of all air data information in the flight deck. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-12289
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A320-212, -214, -232, and -233 airplanes. This AD was prompted by a report of a crack found during an inspection of the pocket radius of the fuselage frame. This AD requires repetitive low frequency eddy current inspections or repetitive high frequency eddy current inspections of this area, and repair if necessary. The repair terminates the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-12286
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Airbus Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4- 600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This AD is intended to complete certain mandated programs intended to support the airplane reaching its limit of validity (LOV) of the engineering data that support the established structural maintenance program. This AD requires inspecting the forward passenger doors to identify the part number, and for affected doors, inspecting to identify existing repairs and doing corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-12176
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 757-200, -200PF, and -200CB series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain fuselage circumferential splice plates are subject to widespread fatigue damage (WFD). This AD requires repetitive low frequency eddy current (LFEC) inspections for cracks of certain circumferential splice plates, and repairs if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-12175
Type: Rule
Date: 2017-06-20
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2007-26-04 for certain The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. AD 2007-26-04 required repetitive inspections for cracking of certain fasteners, and repair if necessary; and a preventive modification, which terminated the repetitive inspections. This AD removes the mandatory modification; adds repetitive inspections of the skin for cracking, a one-time inspection for defects of the production countersunk rivets, and corrective actions if necessary; and adds an optional skin trim-out repair, which will terminate certain inspections. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain skin panels are subject to widespread fatigue damage (WFD). We are issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Certification Procedures for Products and Parts
Document Number: 2017-12723
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. 14 CFR part 21 prescribes certification standards for aircraft, aircraft engines, propellers appliances and parts. The information collected is used to determine compliance and applicant eligibility. The respondents are aircraft parts designers, manufacturers, and aircraft owners.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Certification: Mechanics, Repairman, Parachute Riggers
Document Number: 2017-12715
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. FAR part 65 prescribes requirements for mechanics, repairmen, parachute riggers, and inspection authorizations. The information collected shows applicant eligibility for certification.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Implementation to the Equal Access to Justice Act
Document Number: 2017-12714
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The information is needed to determine an applicant's eligibility for an award of attorney's fees and other expenses under the Equal Access to Justice Act.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Passenger Facility Charge (PFC) Application
Document Number: 2017-12712
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. This program requires public agencies and certain members of the aviation industry to prepare and submit applications and reports to the FAA. Through this program the FAA provides additional funding for airport development which is needed now and in the future.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Associate Administrator for Commercial Space Transportation (AST) Customer Service Survey
Document Number: 2017-12710
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The FAA Office of the Associate Administrator for Commercial Space Transportation (AST) conducts this survey in order to obtain industry input on customer service standards which have been developed and distributed to industry customers.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Office of Dispute Resolution Procedures for Protests and Contact Disputes
Document Number: 2017-12709
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. 14 CFR part 17 sets forth procedures for filing solicitation protests and contract claims in the FAA's Office of Dispute Resolution for Acquisition. The regulations seek factual and legal information from protesters or claimants primarily through written submissions.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Noise Certification Standards for Subsonic Jet Airplanes and Subsonic Transport Category Large Airplanes
Document Number: 2017-12707
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The information collected is needed for applicants' noise certification compliance reports in order to demonstrate compliance with 14 CFR part 36.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Competition Plans, Passenger Facility Charges
Document Number: 2017-12705
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. Title 49, United States Code, Sections 40117(k) and 47106(f) require that a covered airport submit a written competition plan to the Secretary/Administrator in order to receive approval to impose a Passenger Facility Charge (PFC) or to receive a grant under the Airport Improvement Program (AIP).
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Safe Disposition of Life-Limited Aircraft Parts
Document Number: 2017-12702
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. This collection involves response to the Wendall H. Ford Investment and Reform Act for the 21st Century which requires that all persons who remove any life-limited aircraft part have a method to prevent the installation of that part after it has reached its life limit.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: NAS Data Release Request
Document Number: 2017-12701
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The information enables the FAA to evaluate the validity of the user's request for National Airspace (NAS) data from FAA systems and equipment.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: National Air Tour Safety Standards
Document Number: 2017-12699
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. FAA regulations set safety and oversight rules for a broad variety of sightseeing and commercial air tour flights to improve the overall safety of commercial air tours by requiring all air tour.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Experimental Permits for Reusable Suborbital Rockets
Document Number: 2017-12697
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The FAA collects information from applicants for experimental permits in order to determine whether they satisfy the requirements for obtaining an experimental permit under 14 CFR part 437.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Verification of Authenticity of Foreign License, Rating, and Medical Certification
Document Number: 2017-12695
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The information is used to identify airmen to allow the agency to verify their foreign license being used to qualify for a US certificate. Respondents are holders of foreign licenses wishing to obtain US certificates.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Performance and Handling Requirements for Rotocraft
Document Number: 2017-12692
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The FAA requires that certain performance information be provided in the Rotorcraft Flight Manual in order to show compliance to the regulatory requirements. The flight manual, by regulation, must be furnished with each aircraft.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Aircraft Noise Certification Documents for International Operations
Document Number: 2017-12686
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. This collection ensures that U.S. operators have proper noise certification information when they fly outside the U.S., in compliance with ICAO, Annex 16, Volume 1, Amendment 8.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: FAA Safety Briefing Readership Survey
Document Number: 2017-12684
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The survey will help the editors learn more about the target audience and how they elect to improve their safety skills/practices, and what they need to know to improve their safety skills/practices. With this information, the editors can craft FAA Safety Briefing content targeted to its audience to help accomplish the FAA and Department of Transportation's mission of improving safety.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Certification: Pilots and Flight Instructors
Document Number: 2017-12682
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to reinstate a previously approved information collection. FAA regulations prescribe certification standards for pilots, flight instructors, and ground instructors. The information collected is used to determine compliance with applicant eligibility.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: National Flight Data Center Web Portal
Document Number: 2017-12681
Type: Notice
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. National Flight Data Center (NFDC) Web Portal forms are used to collect aeronautical information, detailing the physical description and operational status of all components of the National Airspace System (NAS).
Special Conditions: Gulfstream Aerospace Corporation GVII-G500; Airbag Systems on Multiple-Place and Single-Place Side-Facing Seats
Document Number: 2017-12617
Type: Rule
Date: 2017-06-19
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Gulfstream Aerospace Corporation (Gulfstream) GVII-G500 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport- category airplanes. This design feature is airbag systems on multiple- place and single-place side-facing seats. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.