Federal Aviation Administration September 2016 – Federal Register Recent Federal Regulation Documents

Results 101 - 136 of 136
Airworthiness Directives; Fokker Services B.V. Airplanes
Document Number: 2016-21288
Type: Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD was prompted by an aileron-wing flutter analysis finding that, when a hydraulic aileron actuator is not powered while at least one aileron flutter damper is inoperative (latent failure), the maximum speed currently defined in the airplane flight manual (AFM) is insufficient to meet the required safety margin. This AD requires revising the AFM to include procedures to follow in the event of a hydraulic system failure and abnormal flight control behavior. We are issuing this AD to ensure that the flightcrew has procedures to follow in the event of a hydraulic system failure and abnormal flight control behavior. If not corrected, this condition could lead to aileron flutter and possible reduced control of the airplane.
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-21283
Type: Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A300 B4-203 and A300 B4-2C airplanes. This AD was prompted by cracks found on pylon side panels (upper section) at rib 8. This AD requires a detailed inspection for crack indications of the pylon side panels; a high frequency eddy current (HFEC) inspection to confirm any crack indications; and repair of any cracking, or modification of the pylon side panels, and repetitive inspections and repair if necessary. We are issuing this AD to detect and correct cracking of the pylon side panels. Such cracking could result in pylon structural failure and in- flight loss of an engine.
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-21282
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A318, A319, A320, and A321 series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) which indicates that the main landing gear (MLG) does not comply with certification specifications, which could result in a locking failure of the MLG side stay. This proposed AD would require modification or replacement of certain MLG side stay assemblies. We are proposing this AD to prevent possible collapse of the MLG during takeoff and landing.
Establishment of Class E Airspace; Jetmore, KS
Document Number: 2016-21224
Type: Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace in Jetmore, KS. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures developed at Jetmore Municipal Airport, for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Establishment of Class E Airspace; Lakota, ND
Document Number: 2016-21221
Type: Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace in Lakota, ND. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures developed at Lakota Municipal Airport, for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-21166
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A300 B4-600R series airplanes, Model A300 C4-605R Variant F airplanes, and Model A300 F4-600R series airplanes. This proposed AD was prompted by the results of a full stress analysis of the lower area of a certain frame that revealed a crack could occur in the forward fitting lower radius of a certain frame after a certain number of flight cycles. This proposed AD would require an inspection of the lower area of a certain frame radius for cracking, and corrective action if necessary. We are proposing this AD to detect and correct cracking in the forward fitting lower radius of a certain frame. Such cracking could reduce the structural integrity of the fuselage.
Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Document Number: 2016-21165
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Saab AB, Saab Aeronautics Model SAAB 2000 airplanes. This proposed AD was prompted by an occurrence that was reported of rudder pedal restriction on a SAAB Model 2000 airplane with the large potable water system (LPWS) installed, equipped with in-line heaters. This proposed AD would require installation of shrinkable tubes on the water piping of the basic potable water system (BPWS). We are proposing this AD to prevent water spray in case of a failed pipe or coupling during water filling on the ground. This condition, if not corrected, could freeze parts of the flight control system possibly resulting in reduced control of the airplane.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
Document Number: 2016-21155
Type: Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation Model G-1159, G-1159A, G-1159B, G-IV, and GV airplanes; and certain Model GIV-X and GV-SP airplanes. This AD requires a one-time replacement of the actuator end cap fitting of the main landing gear (MLG) door, and revision of the maintenance or inspection program to establish the life limit of the end cap fitting. This AD was prompted by a report of the failure of the right MLG to extend due to fatigue cracking of the end cap fitting. We are issuing this AD to prevent such cracking, which could result in depletion of the combined (left) and utility hydraulic system fluid and the nitrogen emergency blowdown system, failure of the combined (left) hydraulic system (all phases) to provide adequate hydraulic pressure, and failure of the MLG to extend when commanded.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-21152
Type: Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767-200, -300, and -400ER series airplanes. This AD was prompted by multiple reports of uncommanded escape slide inflation. This AD requires modifying the escape slide regulator valves of the forward-entry door, forward-service door, aft-entry door, and aft-service door, and as applicable, modifying the escape slide regulator valves of the mid-entry door and mid-service door. We are issuing this AD to prevent out-of-tolerance trigger mechanism components (sector and sear) in the escape slide regulator valves, which can produce insufficient trigger engagement and reduced pull force values, possibly leading to uncommanded deployment of the slide during normal airplane maintenance or operation. This condition could result in injury to passengers and crew, damage to equipment, and the slide becoming unusable in an emergency evacuation.
Airworthiness Directives; Fokker Services B.V.
Document Number: 2016-21151
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD), for certain Fokker Services B.V. Model F28 Mark 0100 airplanes. This proposed AD was prompted by an analysis which determined that, for certain areas of the fuselage, the current threshold of an Airworthiness Limitations Section inspection is insufficient to detect early crack development. This proposed AD would require one time high and low frequency eddy current inspections of the affected fuselage skin for cracks and repair if necessary. We are proposing this AD to detect and correct cracks in the fuselage skin; such cracking could result in reduced structural integrity of the fuselage.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-21148
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-300, -400, and -500 series airplanes. This proposed AD was prompted by reports of cracks in horizontal stabilizer lower skins. This proposed AD would require repetitive inspections for cracking of the horizontal stabilizer lower skin, and corrective actions if necessary. This proposed AD also provides actions that would terminate certain repetitive inspections. We are proposing this AD to detect and correct cracks in horizontal stabilizer lower skins resulting in reduced local stiffness of the horizontal stabilizer, which can cause heavy vibration leading to loss of structural integrity of the horizontal stabilizer.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-21147
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. This proposed AD was prompted by a report of incidents involving fatigue cracking in transport category airplanes that are approaching or have exceeded their design service objective and a structural reevaluation by the manufacturer that identified additional structural elements that qualify as structural significant items (SSIs). This proposed AD would require revising the maintenance or inspection program, as applicable, to include inspections that will give no less than the required damage tolerance rating (DTR) for certain SSIs, and repairing any cracked structure. This proposed AD would also require inspections to detect cracks of all SSI structure, and repair if necessary. We are proposing this AD to ensure the continued structural integrity of all The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes.
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-21144
Type: Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A318, A319, and A320 series airplanes. This AD was prompted by reports of chafing damage on the fuselage skin at the bottom of certain frames, underneath the fairing structure. This AD requires repetitive detailed inspections for damage on the fuselage skin at certain frames, and applicable related investigative and corrective actions. We are issuing this AD to detect and correct damage to the fuselage skin, which could lead to crack initiation and propagation, possibly resulting in reduced structural integrity of the fuselage.
Airworthiness Directives; Various Aircraft Equipped With BRP-Powertrain GmbH & Co KG 912 A Series Engine
Document Number: 2016-21052
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for various aircraft equipped with a BRP-Powertrain GmbH & Co KG (formerly Rotax Aircraft Engines) 912 A series engine. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a manufacturing defect found in certain carburetor floats. We are issuing this proposed AD to prevent the fuel supply to the affected cylinder from becoming reduced or blocked, which could cause an in-flight engine shutdown and result in a forced landing and damage to the airplane or injury to the occupants.
Proposed Amendment of Class E Airspace for the Following Wisconsin Towns; Land O' Lakes, WI; Manitowish Waters, WI; Merrill, WI; Oconto, WI; Phillips, WI; Platteville, WI; Solon Springs, WI; Superior, WI; and West Bend, WI
Document Number: 2016-21030
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Kings Land O' Lakes Airport, Land O' Lakes, WI; Manitowish Waters Airport, Manitowish Waters, WI; Merrill Municipal Airport, Merrill, WI; Oconto-J. Douglas Bake Municipal Airport, Oconto, WI; Price County Airport, Phillips, WI; Platteville Municipal Airport, Platteville, WI; Solon Springs Municipal Airport, Solon Springs, WI; Richard I. Bong Airport, Superior, WI; and West Bend Municipal Airport, West Bend, WI. Decommissioning of non- directional radio beacons (NDBs), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at these airports. Additionally, the geographic coordinates for Kings Land O' Lakes Airport; Manitowish Waters Airport; Oconto-J. Douglas Bake Municipal Airport; and Solon Springs Municipal Airport would be adjusted to coincide with the FAA's aeronautical database. The name of Oconto-J. Douglas Bake Municipal Airport (formerly Oconto Municipal Airport) also would be updated.
Proposed Amendment of Class D and E Airspace for the Following Texas Towns; Georgetown, TX; Corpus Christi, TX; Dallas/Fort Worth, TX; Gainesville, TX; Graford, TX; Hebbronville, TX; and Jasper, TX
Document Number: 2016-21028
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify Class D airspace at Georgetown Municipal Airport, Georgetown, TX, and modify Class E airspace extending upward from 700 feet above the surface at Rockport Aransas County Airport, Corpus Christi, TX; Lancaster Airport, Dallas/Fort Worth, TX; Gainesville Municipal Airport, Gainesville, TX; Georgetown Municipal Airport, Georgetown, TX; (Hebbronville, TX) O.S. Wyatt Airport, Realitos, TX; and Jasper County-Bell Field, Jasper, TX. Decommissioning of non-directional radio beacons (NDBs), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at these airports. Additionally, the geographic coordinates at Corpus Christi International Airport; the Corpus Christi VORTAC; Aransas County Airport, Rockport, TX; Nueces County Airport, Robstown, TX; Dallas/Fort Worth International Airport, Dallas/Fort Worth, TX; McKinney National Airport, McKinney, TX; Lancaster Airport; Bourland Field Airport, Fort Worth, TX; and Jasper County-Bell Field would be adjusted to coincide with the FAA's aeronautical database. Also, the names of McCampbell- Porter Airport (formerly T.P. McCampbell Airport); McKinney National Airport (formerly Collin County Regional Airport); and Ralph M. Hall/ Rockwall Municipal Airport (formerly Rockwall Municipal Airport) would be updated to coincide with the FAA's aeronautical database.
Proposed Amendment of Class E Airspace; Mapleton, IA
Document Number: 2016-21027
Type: Proposed Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at James G. Whiting Memorial Field Airport, Mapleton, IA. Decommissioning of the Mapleton non- directional radio beacon (NDB), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Airworthiness Directives; Saab AB, Saab Aeronautics (Type Certificate Previously Held by Saab AB, Saab Aerosystems) Airplanes
Document Number: 2016-20711
Type: Rule
Date: 2016-09-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Saab AB, Saab Aeronautics Model SAAB 2000 airplanes. This AD was prompted by a report that on some airplanes, during the paint removal process for repainting the airplane, the basic corrosion protection (anodizing and primer) coating was sanded down to bare metal on the aluminum skin panels, and the bare metal might not have been treated correctly for corrosion prevention. This AD requires an inspection of structural components of the airplane for any damaged protective coating; inspections of those areas for pitting corrosion, if necessary; a thickness measurement to determine if there is reduced skin thickness, if necessary; and repair, if necessary. We are issuing this AD to detect and correct damaged protective coatings. This condition could result in pitting corrosion damage; and reduced metal thickness, which could result in reduced static and fatigue strength of the airplane's structural parts.
Notice of Availability of the Southern California Metroplex Final Environmental Assessment and Finding of No Significant Impact/Record of Decision
Document Number: 2016-21413
Type: Notice
Date: 2016-09-07
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) is issuing this notice to advise the public that it has published a Final Environmental Assessment and Finding of No Significant Impact/Record of Decision for the Southern California Metroplex project.
MU-2B Series Airplane Training Requirements Update
Document Number: 2016-21356
Type: Rule
Date: 2016-09-07
Agency: Federal Aviation Administration, Department of Transportation
This action relocates and updates the content of SFAR No. 108 to the newly created subpart N of part 91 in order to improve the safety of operating the Mitsubishi Heavy Industries (MHI) MU-2B series airplane. SFAR No. 108 will be eliminated from the Code of Federal Regulations on November 7, 2017, after which time all MU-2B operators must comply with this subpart. The FAA is relocating the training program from the SFAR No. 108 appendices to advisory material in order to allow the FAA to update policy while ensuring significant training adjustments still go through notice-and-comment rulemaking. The FAA is also correcting and updating several inaccurate maneuver profiles to reflect current FAA training philosophy and adding new FAA procedures not previously part of the MU-2B training under SFAR No. 108. This rule will require all MU-2B training programs to meet the requirements of this subpart and to be approved by the FAA to ensure safety is maintained. As a result of this action, operators, training providers, and safety officials will have more timely access to standardized, accurate training material.
Airworthiness Directives; All Hot Air Balloons
Document Number: 2016-21409
Type: Rule
Date: 2016-09-06
Agency: Federal Aviation Administration, Department of Transportation
We are revising Airworthiness Directive (AD) 2016-17-04, which applies to all hot air balloons equipped with BAL[Oacute]NY KUB[Iacute][Ccaron]EK spol. s r.o. Model Kub[iacute][ccaron]ek burners. Both the original and revised AD result from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. This AD action revises AD 2016-17-04 to eliminate certain unnecessary documentation requirements.
Seventh Meeting of SC-233 Addressing Human Factors/Pilot Interface Issues for Avionics
Document Number: 2016-21403
Type: Notice
Date: 2016-09-06
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Seventh Meeting of SC-233 Addressing Human Factors/Pilot Interface Issues for Avionics.
Notice of Intent To Release Certain Properties From All Terms, Conditions, Reservations and Restrictions of a Quitclaim Deed Agreement Between the City of Vero Beach and the Federal Aviation Administration for the Vero Beach Regional Airport, Vero Beach, FL
Document Number: 2016-21225
Type: Notice
Date: 2016-09-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA hereby provides notice of intent to release certain airport properties 2.58 acres at the Vero Beach Regional Airport, Florida from the conditions, reservations, and restrictions as contained in a Quitclaim Deed agreement between the FAA and the Vero Beach Regional Airport, dated October 3, 1947. The City of Vero Beach dedicated a 2.58 acre tract along Airport Drive to become a Public Right-of-Way. This release will be retroactive for the improvements along the airport entrance roadway by the City of Vero Beach. The Fair Market Value (FMV) of this parcel has been determined to be $112,134.12. Documents reflecting the Sponsor's request are available, by appointment only, for inspection at the Vero Beach Regional Airport and the FAA Airports District Office.
Forty-Third Meeting of the SC-224 Airport Security Access Control Systems
Document Number: 2016-21111
Type: Notice
Date: 2016-09-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Forty-Third Meeting of the SC-224 Airport Security Access Control Systems.
Notice of Intent To Release Certain Properties From All Terms, Conditions, Reservations and Restrictions of a Quitclaim Deed Agreement Between the City of Vero Beach and the Federal Aviation Administration for the Vero Beach Regional Airport, Vero Beach, FL
Document Number: 2016-21108
Type: Notice
Date: 2016-09-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA hereby provides notice of intent to release certain airport properties 8.73 acres at the Vero Beach Regional Airport, Florida from the conditions, reservations, and restrictions as contained in a Quitclaim Deed agreement between the FAA and the Vero Beach Regional Airport, dated October 3, 1947. The City of Vero Beach dedicated an 8.73 acre tract along 27th Avenue, Aviation Boulevard and Airport Drive to become a Public Right-of-Way. This release will be retroactive for the improvements along the airport entrance roadway by the City of Vero Beach. The Fair Market Value (FMV) of this parcel has been determined to be $228,510.16. Documents reflecting the Sponsor's request are available, by appointment only, for inspection at the Vero Beach Regional Airport and the FAA Airports District Office.
Notice of Availability for Final Environmental Impact Statement (Final EIS), Department of Transportation Act of 1966 Section 4(f) Evaluation, and Alaska National Interest Lands Conservation Act Subsistence Evaluation for the Proposed Airport, Angoon, Alaska
Document Number: 2016-21083
Type: Notice
Date: 2016-09-02
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the National Environmental Policy Act of 1969 and Council on Environmental Quality (CEQ) regulations, the FAA issues this notice to advise the public that a Final EIS for the proposed airport in Angoon, Alaska, has been prepared. Included in the Final EIS are a subsistence evaluation consistent with Section 810 of the Alaska National Interest Lands Conservation Act (ANILCA) and a final evaluation pursuant to Section 4(f) of the Department of Transportation Act of 1966. The FAA will not make a decision on the proposed action for a minimum of 30 days following the publication of this NOA in the Federal Register. The FAA will record their decision or decisions in a Record of Decision.
Airworthiness Directives; International Aero Engines AG Turbofan Engines
Document Number: 2016-21061
Type: Rule
Date: 2016-09-02
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain International Aero Engines AG (IAE) V2522-A5, V2524-A5, V2525-D5, V2527-A5, V2527E-A5, V2527M-A5, V2528-D5, V2530-A5, and V2533-A5 turbofan engines. This AD was prompted by the fracture of the high- pressure turbine (HPT) stage 2 hub during flight, which resulted in an in-flight shutdown (IFSD), undercowl fire, and smoke in the cabin. This AD requires inspecting the HPT stage 1 hub and HPT stage 2 hub, and, if necessary, their replacement with parts that are eligible for installation. We are issuing this AD to prevent failure of the HPT stage 1 or HPT stage 2 hubs, which could result in uncontained HPT blade release, damage to the engine, and damage to the airplane.
Special Conditions: Bombardier Aerospace Inc. Model BD-700-2A12 and BD-700-2A13 Airplanes; Sidestick Controllers
Document Number: 2016-21123
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Bombardier Aerospace Inc. (Bombardier) Model BD-700-2A12 and BD-700-2A13 airplanes. These airplanes will have a novel or unusual feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is a sidestick controller, designed to be operated with only one hand, in lieu of the conventional wheel or stick controls. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Bombardier Inc., Model BD-700-2A12 and BD-700-2A13 Airplanes; Interactions of Systems and Structures
Document Number: 2016-21122
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Bombardier Inc. (Bombardier) Model BD-700-2A12 and BD-700-2A13 airplanes. These airplanes will have novel or unusual features when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. These design features include systems that, directly or as a result of failure or malfunction, affect structural performance. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
FAA Approval of Noise Compatibility Program; Boise Air Terminal (Gowen Field) Boise, Idaho
Document Number: 2016-21105
Type: Notice
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces its findings (Record of Approval) on the noise compatibility program submitted by the City of Boise, Idaho for the Boise Air Terminal (Gowen Field) under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR part 150 (Part 150). On May 2, 2016, the FAA determined that the noise exposure maps submitted by the City of Boise for the Boise Air Terminal under Part 150 were in compliance with applicable requirements. On August 24, 2016 the FAA approved the Boise Airport Noise Compatibility Program. Seven of the 13 measures recommended in the noise compatibility plan were approved and six measures were disapproved for the purposes of Part 150. In addition, 22 measures were included in the noise compatibility plan that requested no FAA action as they were approved in a previous record of approval, were removed from consideration, or disapproved in a previous record of approval. These measures and FAA's associated determinations are summarized in the attachment to the Record of Approval.
Special Conditions: Bombardier Inc. Model BD-700-2A12 and BD-700-2A13 Airplanes; Hydrophobic Coatings in Lieu of Windshield Wipers
Document Number: 2016-21079
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Bombardier Inc. (Bombardier) Model BD-700-2A12 and BD-700-2A13 airplanes. These airplanes will have a novel or unusual feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is hydrophobic coatings in lieu of windshield wipers. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
First Meeting of the Drone Advisory Committee (DAC)
Document Number: 2016-21013
Type: Notice
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the First Meeting of the Drone Advisory Committee (DAC).
Airworthiness Directives; Airbus Airplanes
Document Number: 2016-20991
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to certain Airbus Model A330-200 Freighter, -200, and -300 series airplanes. Paragraphs (i) and (l) of the regulatory text contain typographical errors in the service bulletin number. This document corrects those errors. In all other respects, the original document remains the same.
Airworthiness Directives; PILATUS AIRCRAFT LTD. Airplanes
Document Number: 2016-20833
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for PILATUS AIRCRAFT LTD. Models PC-12, PC-12/45, PC-12/47, and PC-12/47E airplanes installed with an affected engine mounting frame assembly. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as longitudinal material separation on the internal surface of the engine mounting frame assembly tubes. We are issuing this AD to detect and correct this condition, which could lead to partial or complete failure of the structural joint and possibly result in in-flight detachment of the engine with consequent loss of control.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2016-20826
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by two in-service incidents of a loss of all air data information in the flight deck. This AD requires a revision of the airplane flight manual (AFM) emergency procedures section to provide procedures to guide the crew on how to stabilize the airplane airspeed and attitude for continued safe flight when a loss of all air data information has occurred in the flight deck. We are issuing this AD to prevent loss of control when a loss of all air data information has occurred in the flight deck.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-20825
Type: Rule
Date: 2016-09-01
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2013-24-12 for all The Boeing Company Model 747-8 and 747-8F airplanes. AD 2013-24-12 required repetitive ultrasonic or dye penetrant inspections for cracking of the barrel nuts and bolts on each forward engine mount, and related investigative and corrective actions if necessary. This new AD retains the requirements of AD 2013-24-12 and also requires installing new barrel nuts at the forward engine mounts; or identifying the part number of the barrel nuts, inspecting affected barrel nuts for gaps of the strut bulkhead and forward engine mount, and doing related investigative and corrective actions if necessary. This new AD also removes airplanes from the applicability. This new AD also requires revising the maintenance or inspection program, as applicable, to include a new structurally significant item. This AD was prompted by our determination that it is necessary to mandate the installation of new barrel nuts or new inspections to adequately address the unsafe condition. We are issuing this AD to detect and correct cracked barrel nuts on a forward engine mount, which could result in reduced load capacity of the forward engine mount, separation of an engine under power from the airplane, and consequent loss of control of the airplane.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.