Federal Aviation Administration June 2016 – Federal Register Recent Federal Regulation Documents

This action proposes to establish Class E airspace at Lakota, ND. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures developed at Lakota Municipal Airport, for the safety and management of Instrument Flight Rules (IFR) operations at the airport.

We propose to supersede Airworthiness Directive (AD) 2015-03- 01, for all Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. AD 2015-03-01 currently requires installing additional attaching hardware on the left and right fan cowl access panels and the nacelle attaching structures. Since we issued AD 2015- 03-01, there have been updates to the weight and balance data needed to calculate the center of gravity for affected airplanes. This proposed AD would require weight and balance data to be included in the Weight and Balance Manual and applicable logbooks for airplanes modified per Bombardier Service Bulletin 601R-71-034, Revision B, dated August 1, 2014. The proposed AD would also require the weight and balance data to be used in order to calculate the center of gravity for affected airplanes. We are proposing this AD to prevent damage to the fuselage and flight control surfaces from dislodged engine fan cowl panels, and prevent incorrect weight and balance calculations. Incorrect weight and balance calculations may shift the center of gravity beyond approved design parameters and affect in-flight control, which could endanger passengers and crew.

We are adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F.28 Mark 0070 and 0100 airplanes. This AD was prompted by the need for more restrictive airworthiness limitations. This AD requires revising the maintenance or inspection program, as applicable, to incorporate certain maintenance requirement tasks, thresholds, and intervals. We are issuing this AD to reduce the potential for significant failure conditions and consequent loss of controllability of the airplane.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 787 airplanes. This AD was prompted by the disclosure that the inner diameters of some batches of landing gear pins were not shot peened in accordance with design specifications, and need to be replaced. This AD requires inspection for improperly manufactured landing gear pins, and replacement if necessary. We are issuing this AD to detect and correct insufficient shot peening that could lead to stress corrosion cracking and failure of the landing gear pin, and cause landing gear collapse and inability to control the airplane at high speeds on the ground.

We are adopting a new airworthiness directive (AD) for EVEKTOR, spol. s.r.o. Models L 13 SEH VIVAT and L 13 SDM VIVAT gliders (type certificate previously held by AEROTECHNIK s.r.o.). This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as lack of distinct color marking of the elevator drive. We are issuing this AD to require actions to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200 and -300 series airplanes, Model A330-200 Freighter series airplanes, and Model A340-541 and A340-642 airplanes. This AD was prompted by a report of an under-torqued forward engine mount bolt. This AD requires a one-time torque check of the forward and aft engine mount bolts and corrective actions if necessary. We are issuing this AD to detect and correct improperly torqued engine mount bolts, which could lead to detachment of the engine from the airplane during flight and consequent damage to the airplane and injury to persons on the ground.

The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to certain Piper Aircraft, Inc. Model PA-31-350 airplanes. The wing locations of engine TIO-540-J2B and LTIO-540-J2B in table 1 of the Applicability, paragraph (c), section are incorrect. This document corrects that error. In all other respects, the original document remains the same; however we are publishing the entire rule in the Federal Register.

The FAA proposes to rule and invite public comment on the release of land at Ralph Wenz Field under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).

This action modifies Class D airspace, Class E airspace designated as surface areas, and Class E airspace extending upward from 700 feet above the surface at Antlers Municipal Airport, Antlers, OK; El Reno Regional Airport, Oklahoma City, OK; Wiley Post Airport, Oklahoma City Wiley Post Airport, OK; and Shawnee Regional Airport, Shawnee, OK. The decommissioning of non-directional radio beacons (NDB) and/or cancellation of NDB approaches due to advances in Global Positioning System (GPS) capabilities have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above locations. This action also updates the airport names of University of Oklahoma Westheimer Airport, Norman, OK; David Jay Perry Airport, Goldsby, OK; El Reno Regional Airport; Shawnee Regional Airport; Chandler Regional Airport, OK; and Sundance Airport, Oklahoma City, OK, to coincide with the FAA's aeronautical database. Additionally, this action updates the geographic coordinates for Tinker AFB, Oklahoma City, OK; El Reno Regional Airport; Wiley Post Airport; Antlers Municipal Airport; Sundance Airport; Seminole Municipal Airport, OK; Prague Municipal Airport, OK; Chandler Regional Airport, OK; Tilghman NDB; Cushing Municipal Airport, OK; Cushing NDB; and Cushing Regional Hospital Heliport, OK, to coincide with the FAA's aeronautical database.

This action proposes to modify Class D airspace at Grissom Air Reserve Base (ARB), IN, to allow for a lower Circling Minimum Descent Altitude, where Instrument Flight Rules Category E circling procedures are being used. This action would increase the area of the existing controlled airspace for Grissom ARB, IN. Additionally, this action would add Peru, Grissom ARB, IN to the subtitle of the airspace designation.

We are revising an earlier proposed airworthiness directive (AD) for certain Airbus Model A330-200 and -300 series airplanes; Model A330-200 Freighter series airplanes; and Model A340-200, -300, -500, and -600 series airplanes. The NPRM proposed to require modifying the cockpit door frame structure, installing bonding-leads to the upper cockpit door frame, and modifying the upper cockpit door plate cover. The NPRM was prompted by reports of chafed wiring at the upper left corner of the cockpit door. The affected wire bundle was not grounded on the cockpit door frame. This action revises the NPRM by also requiring, for certain airplanes, installing a noise-reduced cockpit door locking system (CDLS). We are proposing this supplemental NPRM (SNPRM) to prevent electrical shock injury to persons contacting the cockpit door. Since these actions impose an additional burden over those proposed in the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.

The Federal Aviation Administration (FAA) is considering a proposal to change a portion of the airport from aeronautical use to nonaeronautical use and to authorize the conversion of the airport property. The proposal consists of one parcel of land containing a total of approximately 1.6 acres to be used for a fire station. Additionally, the change-in-use of 0.19 acres from aeronautical to non- aeronautical use, approved in 1999 for a fire station that was never constructed, will now revert back to aeronautical use. The property was acquired in 1973 by grant funds. The land comprising this parcel is outside the forecasted need for aviation development and, thus, is no longer needed for indirect or direct aeronautical use. The airport wishes to develop this land for a fire station. The income from the conversion of this parcel will benefit the aviation community by reinvestment in the airport. Approval does not constitute a commitment by the FAA to financially assist in the conversion of the subject airport property nor a determination of eligibility for grant-in-aid funding from the FAA. The disposition of proceeds from the conversion of the airport property will be in accordance with FAA's Policy and Procedures Concerning the Use of Airport Revenue, published in the Federal Register on February 16, 1999. In accordance with Section 47107(h) of Title 49, United States Code, this notice is required to be published in the Federal Register 30 days before modifying the land-use assurance that requires the property to be used for an aeronautical purpose.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a corrected summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This proposed AD was prompted by a report that the grounding jumper between the environmental control system (ECS) bracket and the current return network (CRN) strap near passenger 1 left and 1 right entry doors was not bonded correctly during manufacturing. This proposed AD would require changing the configuration of the grounding jumpers connecting the ECS brackets and CRN straps; measuring the bond resistance; and related investigative and corrective actions if necessary. We are proposing this AD to prevent an incorrectly bonded jumper between the ECS bracket and the CRN strap, which does not provide proper grounding to the door frames at door 1 left and 1 right. If a fault occurs, an electrical shock hazard can exist to passengers and flight crew and could result in personal or fatal injury.

This action modifies Class E airspace extending upward from 700 feet above the surface at Taos Regional Airport, Taos, NM. Decommissioning of non-directional radio beacon (NDB) and cancellation of the NDB approaches due to advances in Global Positioning System (GPS) capabilities have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at Taos Regional Airport.

We propose to adopt a new airworthiness directive (AD) for RUAG Aerospace Services GmbH Models 228-100, 228-101, 228-200, 228-201, 228-202, and 228-212 airplanes that would supersede AD 2009-13-04. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as excessive wear on the guide pin of the power lever or condition lever which could cause functional loss of the flight idle stop. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for certain Fokker Services B.V. Model F.28 airplanes. This proposed AD prompted by reports indicating that the main landing gear (MLG) could not be extended and locked down during approach. This proposed AD would require a detailed inspection of the restrictor check valve filter screens to detect any degraded or failed filter screens, and installation of serviceable parts. We are proposing this AD to detect and correct any degraded or failed filter screens. This condition, if not corrected, could prevent MLG extension and lock-down and result in an emergency landing with consequent injury to occupants and damage to the airplane.

We are superseding Airworthiness Directive (AD) 2005-18-18 for certain The Boeing Company Model 757 airplanes. AD 2005-18-18 required inspections of certain wire bundles in the left and right engine-to- wing aft fairings for discrepancies; installation of back-to-back p- clamps between the wire and hydraulic supply tube at the aft end of the right-hand strut only; and associated re-routing of the wire bundles, if necessary. This new AD also requires an installation of spiral cable wrap on fuel shutoff valve (FSV) wires at the aft end of the strut, for both left and right engines, and related investigative and corrective actions. This AD was prompted by a determination that the service information referenced in AD 2005-18-18 did not adequately address FSV wires at the aft end of the struts. We are issuing this AD to prevent chafing between the wire bundle and the structure of the aft fairing, which could result in electrical arcing and subsequent ignition of flammable vapors and a possible uncontrollable fire.

This action would streamline and improve commercial space transportation regulations' general rulemaking and petition procedures by reflecting current practice; reorganizing the regulations for clarity and flow; and allowing petitioners to file their petitions to the FAA's Office of Commercial Space Transportation electronically. Further, it would expand the option to satisfy commercial space transportation requirements by demonstrating an equivalent level of safety. These changes are necessary to ensure the regulations are current, accurate, and are not unnecessarily burdensome. The intended effect of these changes is to improve the clarity of the regulations and reduce burden on the industry and on the FAA.