Federal Aviation Administration April 2015 – Federal Register Recent Federal Regulation Documents

Results 51 - 100 of 115
Airworthiness Directives; Rolls-Royce plc Turbofan Engines
Document Number: 2015-09001
Type: Proposed Rule
Date: 2015-04-21
Agency: Federal Aviation Administration, Department of Transportation
We are revising an earlier proposed airworthiness directive (AD) for all Rolls-Royce plc (RR) RB211 Trent 768-60, 772-60, and 772B- 60 turbofan engines. The NPRM proposed to require inspection of the fan case low-pressure (LP) fuel tubes and clips and the fuel oil heat exchanger (FOHE) mounts and hardware. The NPRM was prompted by fuel leaks caused by damage to the fan case LP fuel tube. This supplemental action revises the NPRM by expanding inspections and corrective actions, correcting a part number (P/N) and the costs of compliance, reducing the applicability, providing another method to comply with certain requirements, and giving credit for certain previous actions. We are proposing this SNPRM to prevent failure of the fan case LP fuel tube, which could lead to an in-flight engine shutdown, loss of thrust control, and damage to the airplane.
Airworthiness Directives; Pratt & Whitney Turbofan Engines
Document Number: 2015-08995
Type: Proposed Rule
Date: 2015-04-21
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Pratt & Whitney (PW) PW4164-1D, PW4168-1D, PW4168A-1D and PW4170 engines, and certain PW4164, PW4168, and PW4168A turbofan engines. This proposed AD was prompted by fuel nozzle-to-fuel supply manifold interface fuel leaks. This proposed AD would require inspecting fuel nozzles for signs of leakage, replacing hardware as required, and torqueing to specified requirement. We are proposing this AD to prevent fuel leaks which could result in engine fire and damage to the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2015-08718
Type: Rule
Date: 2015-04-21
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by a report that during production, an incorrect clevis was used, resulting in improper installation onto the alternate release cable of the main landing gear (MLG). This AD requires a detailed visual inspection of the emergency release clevis of the MLG to determine if an incorrect clevis has been installed, and if necessary, replacing the clevis with a correct clevis and clevis pin. We are issuing this AD to detect and correct improper installation of the clevis, which could cause loss of the alternate release system and prevent the MLG from extending and retracting, and could consequently affect the airplane's continued safe flight and landing.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-08407
Type: Rule
Date: 2015-04-20
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200, -200PF, -200CB, and -300 series airplanes. This AD was prompted by numerous reports of unintended lateral oscillations during final approach, just before landing. This AD requires, depending on airplane configuration, installing new relays and bracket assemblies, inspecting to ensure that the new relays do not contact adjacent wire bundles, torquing the bracket assembly installation nuts and ground stud nuts, doing bond resistance tests between the bracket assemblies and the terminal lugs on the ground studs, and related investigative and corrective actions if necessary. We are issuing this AD to reduce the chance of unintended lateral oscillations near touchdown, which could result in loss of lateral control of the airplane, and consequent airplane damage or injury to flightcrew and passengers.
Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
Document Number: 2015-07162
Type: Rule
Date: 2015-04-20
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain ATR-GIE Avions de Transport R[eacute]gional Model ATR72-212A airplanes. This AD requires inspection of the shock mount pick-up fittings and cone bolts, and replacement of certain shock mount pick-up fittings if necessary. This AD was prompted by reports of several cases of engine shock mount pick-up fittings with cracks or failure on the engine left- hand (LH) aft side attachment. We are issuing this AD to detect and correct an aft side attachment pick-up fitting failure associated with a cone bolt failure that could reduce the structural integrity of the concerned engine nacelle, and possibly result in detachment of the engine and consequent reduced control of the airplane.
Notice of Submission Deadline for Schedule Information for Los Angeles International Airport, O'Hare International Airport, San Francisco International Airport, John F. Kennedy International Airport, and Newark Liberty International Airport for the Winter 2015 Scheduling Season
Document Number: 2015-08927
Type: Notice
Date: 2015-04-17
Agency: Federal Aviation Administration, Department of Transportation
Under this notice, the FAA announces the submission deadline of May 21, 2015, for winter 2015-2016 flight schedules at Los Angeles International Airport (LAX), Chicago's O'Hare International Airport (ORD), San Francisco International Airport (SFO), New York's John F. Kennedy International Airport (JFK), and Newark Liberty International Airport (EWR) in accordance with the International Air Transport Association (IATA) Worldwide Slot Guidelines. The deadline coincides with the schedule submission deadline for the IATA Slot Conference for the winter 2015 scheduling season.
Amendment of Authority Citation for Part 71: Designation of Class A, B, C, D, and E Airspace Areas; Air Traffic Service Routes; and Reporting Points, and Part 73: Special Use Airspace
Document Number: 2015-08781
Type: Rule
Date: 2015-04-17
Agency: Federal Aviation Administration, Department of Transportation
The FAA is amending the authority citation for part 71 and part 73 by adding an additional citation at the beginning of the authority citation string. This action updates and clarifies the Administrator's rulemaking authority to be consistent with other parts of Title 14, Code of Federal Regulations.
Membership in the National Parks Overflights Advisory Group Aviation Rulemaking Committee
Document Number: 2015-08767
Type: Notice
Date: 2015-04-17
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) and the National Park Service (NPS) are inviting interested persons to apply to fill three upcoming openings on the National Parks Overflights Advisory Group (NPOAG) Aviation Rulemaking Committee (ARC). The openings will represent general aviation concerns, air tour operator concerns, and Native American interests, respectively. Selected members will each serve 3-year terms.
Airworthiness Directives; Przedsiebiorstwo Doswiadczalno-Produkcyjne Szybownictwa “PZL-Bielsko” Sailplanes
Document Number: 2015-08733
Type: Proposed Rule
Date: 2015-04-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for Przedsiebiorstwo Doswiadczalno-Produkcyjne Szybownictwa ``PZL-Bielsko'' Model SZD-50-3 ``Puchacz'' sailplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as detachment of the rudder cable fitting block from the fuselage. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; GA 8 Airvan (Pty) Ltd Airplanes
Document Number: 2015-08720
Type: Proposed Rule
Date: 2015-04-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for GA 8 Airvan (Pty) Ltd Model GA8-TC320 airplanes that would revise AD 2015- 06-02. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as missing required engine mount fire seal washers, which could reduce the engine retention capability in the event of a fire. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Consensus Standards, Light-Sport Aircraft
Document Number: 2015-08589
Type: Notice
Date: 2015-04-16
Agency: Federal Aviation Administration, Department of Transportation
This notice announces the availability of eleven revised consensus standards relating to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and effective September 1, 2004. ASTM International Committee F37 on Light Sport Aircraft developed the revised standards with Federal Aviation Administration (FAA) participation. By this notice, the FAA finds the revised standards acceptable for certification of the specified aircraft under the provisions of the Sport Pilot and Light-Sport Aircraft rule.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Type Certification Procedures for Changed Products
Document Number: 2015-08632
Type: Notice
Date: 2015-04-15
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 22, 2014. 14 CFR part 21 may require applicants to demonstrate compliance with the latest regulations in effect on the date of application for amended Type Certificates (TC) or a Supplemental TCs for aeronautical products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2015-08465
Type: Proposed Rule
Date: 2015-04-15
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A318, A319, and A320 series airplanes modified by a particular supplemental type certificate (STC). This proposed AD was prompted by reports of cracks found during inspections of the in-flight entertainment system radome assembly. This proposed AD would require repetitive detailed inspections for cracks in the radome assembly, and replacement of the radome if necessary. We are proposing this AD to detect and correct cracks in the radome assembly, which could result in the radome (or pieces) separating from the airplane and striking the tail, consequently reducing the controllability of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-08464
Type: Proposed Rule
Date: 2015-04-15
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2013-23- 03, which applies to certain The Boeing Company Model 747-100, 747- 100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, and 747SR series airplanes. AD 2013-23-03 currently requires doing a detailed inspection of certain attach fittings for a cylindrical defect and replacing if necessary. Since we issued AD 2013- 23-03, we received a report that a machining defect was also found on some of the actuator assemblies inspected during manufacture. This defect could lead to fatigue cracking and subsequent fracture. For certain airplanes, this proposed AD would mandate new inspections of the inboard actuator attach fittings for machining defects, and overhaul or replacement, if necessary. This proposed AD would also limit the compliance time for doing the replacement for certain other airplanes. We are proposing this AD to detect and correct defective inboard actuator attach fittings which, combined with loss of the outboard actuator load path, could result in uncontrolled retraction of the outboard flap, damage to flight control systems, and consequent reduced controllability of the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2015-08463
Type: Proposed Rule
Date: 2015-04-15
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2011-07- 10, for certain Bombardier, Inc. Model BD-100-1A10 (Challenger 300) airplanes. AD 2011-07-10 currently requires revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness; doing detailed visual inspections; removing discrepant material; cleaning the surfaces of the valves, the plug of the sensing port, and the cabin pressure-sensing port plug; securing the insulation; installing a new safety valve, and replacing certain cabin pressure-sensing port plugs. Since we issued AD 2011-07-10, we have received reports of in-flight loss of cabin pressurization that was attributed to partial blockage of a safety valve cabin pressure-sensing port in conjunction with a failed safety valve manometric capsule. This proposed AD would retain all requirements of AD 2011-07-10. This proposed AD would also require a detailed visual inspection of both safety valves and the surrounding area for foreign material, room temperature vulcanizing (RTV) silicone, contamination, foam on the bulkhead structure, tape or insulation, and loose material; and corrective actions if necessary. We are proposing this AD to detect and correct blockage of a safety valve cabin pressure-sensing port, which could result in loss of cabin pressure.
Special Conditions: Honda Aircraft Company, Model HA-420 HondaJet, Lithium-Ion Batteries
Document Number: 2015-08586
Type: Proposed Rule
Date: 2015-04-14
Agency: Federal Aviation Administration, Department of Transportation
This action proposes special conditions for the Honda Aircraft Company, Model HA-420 airplane. This airplane will have a novel or unusual design feature associated with the installation of lithium-ion (Li-ion) batteries. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2015-08389
Type: Rule
Date: 2015-04-14
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2015-02-04 for certain Dassault Aviation Model MYSTERE-FALCON 50 airplanes. AD 2015- 02-04 required installing two protective plates between the electrical wiring under the glare shield and the engine fire pull handles. This new AD continues to require installing two protective plates between the electrical wiring under the glare shield and the engine fire pull handles. This AD was prompted by our determination that the published version of AD 2015-02-04 incorrectly identified the AD number as ``AD 2014-02-04'' in a certain paragraph. We are issuing this AD to prevent chafing of the electrical wiring, which could result in a short circuit and generation of smoke in the cockpit, potential loss of several functions essential for safe flight, and consequent reduced controllability of the airplane.
Airworthiness Directives; Agusta S.p.A. Helicopters
Document Number: 2015-08384
Type: Rule
Date: 2015-04-14
Agency: Federal Aviation Administration, Department of Transportation
We are publishing a new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model A109, A109A, A109A II, A109C, A109K2, A109E, A119, A109S, AW119 MKII, and AW109SP helicopters, which was sent previously to all known U.S. owners and operators of these helicopters. This AD requires inspecting certain tail rotor (T/R) pitch control links (pitch links) for freedom of movement, corrosion, excessive friction of the spherical bearings, and cracks. This AD is prompted by a report of an in-flight failure of a pitch link on an Agusta Model AW119 MKII helicopter. These actions are intended to prevent loss of T/ R pitch control and subsequent loss of control of the helicopter.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-08137
Type: Rule
Date: 2015-04-14
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300ER, and 777F series airplanes. This AD was prompted by a report of a jettison fuel pump that was shut off by the automatic shutoff system during the center tank fuel scavenge process on a short-range flight and a subsequent failure analysis of the fuel scavenge system. This AD requires making wiring changes, modifying certain power panels, installing electrical load management system 2 (ELMS2) software, and accomplishing a functional test. We are issuing this AD to prevent extended dry running of the jettison fuel pumps, which can be a potential ignition source inside the main fuel tanks, and consequent fuel tank fire or explosion in the event that the jettison pump overheats or has an electrical fault.
Airworthiness Directives; Airbus Airplanes
Document Number: 2015-08071
Type: Proposed Rule
Date: 2015-04-14
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 98-20-27, for all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). AD 98-20-27 currently requires repetitive inspections to detect fatigue cracking of the wing top skin at the front spar joint; and a follow-on eddy current inspection and repair, if necessary. Since we issued AD 98-20-27, we have received reports of cracking of the wing top skin in an area not required for inspection by AD 98-20-27. This proposed AD would reduce the inspection compliance time and intervals, and extend the inspection area of the wing top skin at the front spar joint. We are proposing this AD to detect and correct fatigue cracking of the wing top skin at the front spar joint, which could result in reduced structural integrity of the airplane.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
Document Number: 2015-07858
Type: Rule
Date: 2015-04-14
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for PILATUS Aircraft Ltd. Model PC-7 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as the potential for a spring on the air conditioning compressor clutch plate to shear the oil cooler inlet-hose due to the close routing of these parts without a protective cover. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; BAE Systems (Operations) Limited Airplanes
Document Number: 2015-07800
Type: Rule
Date: 2015-04-14
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model BAe 146 series airplanes, and Model Avro 146-RJ series airplanes. This AD was prompted by a report of a pressurization problem on an airplane during climb-out; a subsequent investigation showed a crack in the fuselage skin. This AD requires require repetitive external eddy current inspections on the aft skin lap joints of the rear fuselage for cracking, corrosion, and other defects, and repair if necessary. We are issuing this AD to detect and correct cracking, corrosion, and other defects, which could affect the structural integrity of the airplane.
Public Notice for Waiver for Aeronautical Land-Use Assurance at Will Rogers World Airport, Oklahoma City, OK
Document Number: 2015-08382
Type: Notice
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) is considering a proposal to change a portion of the airport from aeronautical use to non-aeronautical use and to authorize the conversion of the airport property. The proposal consists of three parcels of land containing a total of approximately 240.80 acres located on the east side of the airport between South Portland Avenue and Interstate Highway 44. The parcel 52 was originally acquired under the following grant: Airport Development Aid Program (ADAP) No. 6-40-0072-76 in 1975. The parcel 51 was originally acquired under the following grant: Airport Development Program (AIP) No. 3-40-0072-23 in 1992. The parcel 46 was acquired by Trust funds only. The land comprising these parcels is outside the forecasted need for aviation development and, thus, is no longer needed for indirect or direct aeronautical use. The Airport wished to develop this land for compatible commercial, non-aeronautical use. The income from the conversion of these parcels will benefit the aviation community by reinvestment in the airport. Approval does not constitute a commitment by the FAA to financially assist in the conversion of the subject airport property nor a determination of eligibility for grant-in-aid funding from the FAA. The disposition of proceeds from the conversion of the airport property will be in accordance with FAA's policy and Procedures Concerning the Use of Airport Revenue, published in the Federal Register on February 16, 1999. In accordance with section 47107(h) of title 49, United States Code, this notice is required to be published in the Federal Register 30 days before modifying the land-use assurance that requires the property to be used for an aeronautical purpose.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2015-08329
Type: Proposed Rule
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, Model CL-600-2D24 (Regional Jet Series 900) airplanes, and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This proposed AD was prompted by results of a design review indicating that the burst pressure of the flexible hose, used to vent oxygen from the high- pressure relief valve of the oxygen cylinder overboard, was lower than the opening pressure of the high-pressure relief valve, which could cause the flexible hose to burst before it can vent the excess oxygen overboard. This proposed AD would require replacing the oxygen hose assembly with a new, improved assembly. We are proposing this AD to prevent the accumulation of oxygen in an enclosed space, which could result in an uncontrolled oxygen-fed fire if an ignition source is nearby.
Slot Management and Transparency for LaGuardia Airport, John F. Kennedy International Airport, and Newark Liberty International Airport; Notice of Availability of Responses to Clarifying Questions; Request for Extension of Comment Period
Document Number: 2015-08168
Type: Proposed Rule
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
This action announces the placement in the docket of a response to requests for clarification of the notice of proposed rulemaking (NPRM) published on January 8, 2015. In the NPRM, the U.S. Department of Transportation (DOT) and the FAA proposed to replace the Orders limiting scheduled operations at John F. Kennedy International Airport (JFK) and Newark Liberty International Airport (EWR), and limiting scheduled and unscheduled operations at LaGuardia Airport (LGA). The Orders are scheduled to expire when the rulemaking is final and in effect, but not later than October 29, 2016. The proposed rule is intended to provide a longer-term and comprehensive approach to slot management at JFK, EWR, and LGA. By letters posted to the public docket, Airlines for America and Sabre Corporation submitted questions regarding various provisions in the NPRM they believe need further clarification before meaningful comments can be submitted to the docket. The DOT and the FAA have reviewed these requests and a coordinated response has been placed in the docket. That document also responds to Airlines for America's renewed request for an extension of the comment period and request for a public meeting.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2015-08116
Type: Rule
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2015-08114
Type: Rule
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2015-08113
Type: Rule
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2015-08103
Type: Rule
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2015-08098
Type: Proposed Rule
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to remove certain redundant or underutilized ground-based non-directional beacon and very high frequency, omnidirectional radio range Standard Instrument Approach Procedures based on the criteria established by the FAA's Policy for Discontinuance of Certain Instrument Approach Procedures.
Airworthiness Directives; Viking Air Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
Document Number: 2015-08074
Type: Proposed Rule
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Viking Air Limited (Type Certificate Previously Held by Bombardier, Inc.) Model DHC-7-1 and DHC-7-100 airplanes. This proposed AD was prompted by reports of cracks that were discovered in the outboard nacelles upper longeron channels and angles. This proposed AD would require a one-time detailed visual inspection for cracking in the outboard nacelles upper longeron channels and angles; and repair if necessary. We are proposing this AD to detect and correct cracks in the outboard nacelles upper longeron channels and angles, which could lead to the loss of stiffness in the forward engine mount; and possible catastrophic failure.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2015-08073
Type: Proposed Rule
Date: 2015-04-13
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This proposed AD was prompted by results of a design review indicating that the burst pressure of the flexible hose, used to vent oxygen from the high-pressure relief valve of the oxygen cylinder overboard, was lower than the opening pressure of the high-pressure relief valve, which could cause the flexible hose to burst before it can vent the excess oxygen overboard. This proposed AD would require replacing the oxygen hose assembly with a new, improved assembly. We are proposing this AD to prevent the accumulation of oxygen in an enclosed space, which could result in an uncontrolled oxygen-fed fire if an ignition source is nearby.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2015-08072
Type: Proposed Rule
Date: 2015-04-10
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 767-200, -300, and -300F series airplanes. This proposed AD was prompted by a finding that certain barrel nuts installed at the vertical fin may be subject to stress corrosion and cracking. This proposed AD would require either repetitive inspections of vertical fin barrel nuts for corrosion or a magnetic check to identify certain barrel nuts, and corrective actions if necessary. We are proposing this AD to detect and correct corroded and loose barrel nuts that attach the vertical fin to body section 48, which could result in reduced structural integrity of the vertical fin attachment joint, loss of the vertical fin, and consequent loss of controllability of the airplane.
Interpretation of the Flight Time Limitations
Document Number: 2015-07991
Type: Proposed Rule
Date: 2015-04-10
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to interpret our regulations to not apply to flight segments that are flown by a flightcrew consisting of only two pilots and no other flight crewmembers.
Airworthiness Directives; GE Aviation Czech s.r.o. Turboprop Engines
Document Number: 2015-07865
Type: Proposed Rule
Date: 2015-04-10
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain serial number GE Aviation Czech s.r.o. M601E-11, M601E-11A, and M601F turboprop engines. This proposed AD was prompted by the determination that wear or cracking, and subsequent misalignment of the quill shaft of the engine and the power turbine (PT) shaft, may lead to rupture of the quill shaft, overspeed of the PT, and uncontained engine failure. This proposed AD would require inspection of the reduction gearbox and supporting cone. We are proposing this AD to prevent misalignment and rupture of the quill shaft, which could lead to overspeed of the PT, uncontained engine failure, and damage to the airplane.
Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
Document Number: 2015-07801
Type: Proposed Rule
Date: 2015-04-10
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all ATRGIE Avions de Transport R[eacute]gional Model ATR42 and ATR72 airplanes. This proposed AD was prompted by new occurrences of certain cracked main landing gear (MLG) rear hinge pins. This proposed AD would require identifying the serial number and part number of the MLG rear hinge pins, and replacement of pins or the MLG if necessary. We are proposing this AD to detect and correct cracked rear hinge pins, which could lead to MLG structural failure, possibly resulting in collapse of the MLG and consequent injury to the occupants of the airplane.
Notice of Intent To Rule on Request To Release Airport Property at the Former Stapleton International Airport, Denver, Colorado
Document Number: 2015-08219
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to rule and invite public comment on the release of land at the former Stapleton International Airport (SIA) under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).
Notice of Intent To Rule on Request To Release Airport Property at the Former Stapleton International Airport, Denver, Colorado
Document Number: 2015-08217
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to rule and invite public comment on the release of land at the former Stapleton International Airport (SIA) under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).
Notice of Intent to Rule on Request to Release Airport Property at the Former Stapleton International Airport, Denver, Colorado
Document Number: 2015-08215
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to rule and invite public comment on the release of land at the former Stapleton International Airport (SIA) under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).
Notice of Intent To Rule on Request To Release Airport Property at the Former Stapleton International Airport, Denver, Colorado
Document Number: 2015-08206
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to rule and invite public comment on the release of land at the former Stapleton International Airport (SIA) under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).
Petition for Exemption; Summary of Petition Received
Document Number: 2015-08155
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Aircraft Registration Renewal
Document Number: 2015-08122
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 22, 2014. The information collected on an Aircraft Registration Renewal Application, AC Form 8050-1B, is used by the FAA to verify and update aircraft registration information collected for an aircraft when it was first registered.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Aviation Insurance
Document Number: 2015-08121
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 4, 2014. The requested information is included in air carriers applications for insurance when insurance is not available from private sources.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Certification of Airports
Document Number: 2015-08119
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. 14 CFR part 139 establishes certification requirements for airports serving scheduled air carrier operations in aircraft with 10- 30 seats. These requirements result in information collections from respondents.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Survey of Airman Satisfaction With Aeromedical Certification Services
Document Number: 2015-08118
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. This survey assesses airman opinion of key dimensions of service quality of aeromedical certification services.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Pilot Certification and Qualification Requirements for Air Carrier Operations
Document Number: 2015-08117
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. FAA aviation safety inspectors review Airline Transport Pilot (ATP) Certification Training Program (CTP) submittals to determine that the program complies with the applicable requirements of 14 CFR 61.156.
Research, Engineering and Development Advisory Committee; Meeting
Document Number: 2015-08106
Type: Notice
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
Airworthiness Directives; Airbus Airplanes
Document Number: 2015-07799
Type: Rule
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A300 B4-601, B4-603, B4-620, B4-622, B4-605R, B4-622R, F4- 605R, F4-622R, and C4-605R Variant F airplanes; and Model A310-203, - 204, -221, -222, -304, -322, -324, and -325 airplanes. This AD was prompted by a report of inner skin disbonding damage on a rudder. This AD requires repetitive ultrasonic inspections for disbonding of certain rudders; an elasticity of laminate checker inspection; a woodpecker or tap test inspection; venting the core, if necessary; and repairing, if necessary. We are issuing this AD to detect and correct rudder disbonding, which could affect the structural integrity of the rudder.
Airworthiness Directives; Cessna Aircraft Company Airplanes
Document Number: 2015-07705
Type: Rule
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Model 402C and 414A airplanes. This AD requires repetitively inspecting the engine mount beams for cracks and contacting Cessna for FAA-approved corrective action if cracks are found. This AD also requires sending an inspection report to the FAA and to Cessna. This AD was prompted by reports of cracks found across the engine mount beams. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes
Document Number: 2015-06785
Type: Rule
Date: 2015-04-09
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2011-09-03 for all Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G airplanes. AD 2011-09-03 required repetitive eddy current inspections to detect cracks in the center wing upper and lower rainbow fittings, and corrective actions if necessary; and repetitive replacement of rainbow fittings, which would extend the repetitive interval for the next inspection. This new AD requires reduced intervals for inspections of the upper rainbow fittings. This AD was prompted by analysis of in-service cracking, which has shown that a reduction in the inspection intervals is necessary for the upper rainbow fittings. We are issuing this AD to detect and correct fatigue cracking of the upper and lower rainbow fittings on the center wings, which could grow large and lead to the failure of the fitting and a catastrophic failure of the center wing.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.