Federal Aviation Administration 2011 – Federal Register Recent Federal Regulation Documents

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on March 10, 2011, vol. 76, no. 47, page 13265-13266. Standards have been established for the certification of agricultural aircraft. The information collected shows applicant compliance and eligibility for certification by FAA.

This action amends Class E airspace at Poplar Municipal Airport, Poplar, MT. The airport was moved 1.5 Nautical Miles (NM) to the northeast. Controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures at Poplar Municipal Airport, Poplar, MT. This improves the safety and management of Instrument Flight Rules (IFR) operations at the airport. This also corrects the airport name from Poplar Airport.

This action proposes to establish Class E airspace at Nephi Municipal Airport, Nephi, UT. Controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures at Nephi Municipal Airport, Nephi, UT. The FAA is proposing this action to enhance the safety and management of aircraft operations at the airport.

This action amends existing Class D and Class E airspace at Idaho Falls, ID, by changing the name of the airport to Idaho Falls Regional Airport, and adjusting the geographic coordinates of the airport. This action also adds additional Class E airspace necessary to accommodate aircraft using new Area Navigation (RNAV) Required Navigation Performance (RNP) standard instrument approach procedures at Idaho Falls Regional Airport. This improves the safety and management of Instrument Flight Rules (IFR) operations at the airport.

This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We propose to adopt a new airworthiness directive (AD) for Eurocopter Deutschland (ECD) Model EC135 helicopters. This proposed AD results from a mandatory continuing airworthiness information (MCAI) AD issued by the aviation authority of the Federal Republic of Germany, with which we have a bilateral agreement, to identify and correct an unsafe condition. The MCAI AD states that in the past, the FADEC FAIL caution light illuminated on a few EC135 T1 helicopters. They state that this was caused by a discrepancy in the parameters which were generated within the fuel main metering unit and transmitted to the FADEC. This discrepancy led to the display of the FADEC FAIL caution light and ``freezing'' of the fuel main metering valve at its position resulting in loss of the automatic engine control in the affected system. With the EASA AD, a synchronization procedure for pilots, which was already used in the past, is being re-introduced, which prevents the parameter discrepancy arising and thus sustains the automatic engine control. The proposed AD actions are intended to prevent failure of the FADEC to automatically meter fuel, indicated by a FADEC FAIL cockpit caution light, and subsequent loss of control of the helicopter.

We propose to adopt a new airworthiness directive (AD) for the specified Bell model helicopters. This proposed AD would require revising the Operating Limitations, Section 1, of the Rotorcraft Flight Manual (RFM) to add an operating limitation when a litter kit is installed. This proposed AD is prompted by the need for corresponding operating limitations prohibiting flight, including hover, with the litter doorpost removed when certain litter kits are installed. The actions specified by this proposed AD are intended to add an operating limitation when a litter kit is installed to prohibit flight with the doorpost removed to prevent loss of structural integrity of the fuselage.

The FAA publishes a monthly notice, as appropriate, of PFC approvals and disapprovals under the provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Pub. L. 101-508) and Part 158 of the Federal Aviation Regulations (14 CFR Part 158). This notice is published pursuant to paragraph d of Sec. 158.29.

We are superseding three existing airworthiness directives (ADs) that apply to the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above that will supersede an existing AD. This emergency AD was sent previously to all known U.S. owners and operators of PIAGGIO AERO INDUSTRIES S.p.A (Piaggio) Model PIAGGIO P-180 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The Federal Aviation Administration (FAA) proposes to fund, construct, and operate a new Airport Traffic Control Tower (ATCT) and Base Building at the University of Illinois Willard Airport (CMI), Savoy, Illinois. The FAA's preferred alternative is to construct the ATCT at a location on the east central portion of CMI. The purpose and need of the proposed project is to enhance visibility and improve safety of airport movement areas, have the capability to meet existing and future operational and administrative expansion requirements, and improve operational efficiency of the facility because the current ATCT facility is a non-standard design of insufficient height and size. The FAA has prepared a Draft Environmental Assessment (DEA) in conformance with the requirements of the National Environmental Policy Act of 1969 (NEPA) and FAA Order 1050.1E, Environmental Impacts: Policies and Procedures. The DEA analyzes the potential environmental impacts that may result from construction and operation of the proposed new ATCT and Base Building at the proposed site, as well as the no action alternative (i.e., not constructing and operating the new ATCT). As part of the proposed project, the DEA also analyzes the potential environmental impacts that may result from replacement and operation of an instrument landing system antenna; and the upgrade and operation of a Very High Frequency Omnidirectional Range with Tactical Air Navigation (VORTAC) facility. The DEA is available for public review during a 30-day public comment period at the following libraries: Champaign Public Library, 200 W Green St., Champaign, IL 61820; Tolono Public Library, 111 E. Main, Tolono, IL 61880.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This action proposes to revise Class E airspace at Talkeetna, AK. The revision of four Standard Instrument Approach Procedures (SIAPs) and the Obstacle Departure Procedure (ODP) at the Talkeetna Airport has made this action necessary to enhance safety and management of Instrument Flight Rules (IFR) operations.

The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 217: Joint with EUROCAE WG-44 Terrain and Airport Mapping Databases.

The FAA is issuing this notice to advise the public of a meeting of the RTCA Program Management Committee.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires modifying certain thrust reverser control system wiring to the flap control unit (FCU). This AD was prompted by a report of automatic retraction of the leading edge flaps due to indications transmitted to the FCU from the thrust reverser control system during takeoff. We are issuing this AD to prevent automatic retraction of the leading edge flaps during takeoff, which could result in reduced climb performance and consequent collision with terrain and obstacles or forced landing of the airplane.

We are adopting a new airworthiness directive (AD) for the products listed above that would supersede two existing ADs. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCA I) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The Federal Aviation Administration (FAA) is announcing the availability of Advisory Circular (AC) 90-109, which provides information and guidance to owners and pilots of experimental airplanes and to flight instructors who teach in these airplanes. This information and guidance contains recommendations for training experience for pilots of experimental airplanes in a variety of grouping based on performance and handling characteristics. This AC does not address the testing of newly built experimental airplanes. The current edition of AC 90-89, Amateur-Built and Ultralight Flight Testing Handbook, provides information on such testing. However, if a pilot is planning on participating in a flight-test program in an unfamiliar experimental airplane, this AC should be used to develop the skills and knowledge necessary to safely accomplish the test program using AC 90-89. This AC may also be useful in planning the transition to any unfamiliar fixed-wing airplanes, including type-certificated (TC) airplanes.

This action proposes special conditions for Boeing Model 747-8 series airplanes. These airplanes will have novel or unusual design features associated with the installation of an overhead flight attendant rest compartment. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. Additional special conditions will be issued for other novel or unusual design features of the Boeing 747-8 airplanes.

We are revising an earlier NPRM for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: