Petition for Exemption From the Federal Motor Vehicle Theft Prevention Standard; Jaguar Land Rover North America LLC
This document grants in full the Jaguar Land Rover North America LLC's, (Jaguar Land Rover) petition for exemption of the Range Rover Velar vehicle line in accordance with Exemption from Vehicle Theft Prevention Standard. This petition is granted because the agency has determined that the antitheft device to be placed on the line as standard equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Federal Motor Vehicle Theft Prevention Standard (Theft Prevention Standard).
Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices, and Associated Equipment; Denial of Petition for Rulemaking
This document denies a petition for rulemaking submitted by Mr. William H. Thompson III requesting NHTSA amend Federal Motor Vehicle Safety Standard (FMVSS) No. 108, Lamps, reflective devices, and associated equipment. Specifically, Mr. Thompson requested we revise the activation process for red and amber signal warning lamps on school buses to require a new intermediate step during which both colors are activated simultaneously and flash in an alternating pattern and that we decouple the process by which lamps transition to the red-only configuration from the opening of the bus entrance door. NHTSA is denying this petition because Mr. Thompson has not identified a safety need to justify making changes he requested, and Mr. Thompson did not provide persuasive quantitative data to show adopting his requested changes would result in a net benefit to safety.
Uniform Procedures for State Highway Safety Grant Programs
This final rule makes changes and clarifications to the revised uniform procedures implementing State highway safety grant programs in response to comments received on the interim final rule published May 23, 2016.
Sumitomo Rubber USA, LLC, Denial of Petition for Decision of Inconsequential Noncompliance
Sumitomo Rubber USA, LLC (SRUSA), has determined that certain Sumitomo Kelly brand commercial truck tires do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 119, New Pneumatic Tires for Motor Vehicles with a GVWR of more than 4,536 kilograms (10,000 pounds) and Motorcycles. SRUSA filed a noncompliance report dated January 3, 2017. SRUSA also petitioned NHTSA on January 31, 2017, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety.
Removing Regulatory Barriers for Vehicles With Automated Driving Systems
NHTSA seeks public comments to identify any regulatory barriers in the existing Federal Motor Vehicle Safety Standards (FMVSS) to the testing, compliance certification and compliance verification of motor vehicles with Automated Driving Systems (ADSs) and certain unconventional interior designs. NHTSA is focusing primarily, but not exclusively, on vehicles with ADSs that lack controls for a human driver; e.g., steering wheel, brake pedal or accelerator pedal. The absence of manual driving controls, and thus of a human driver, poses potential barriers to testing, compliance certification and compliance verification. For example, many of the FMVSS refer to the ``driver'' or ``driver's seating position'' in specifying where various vehicle features and systems need to be located so that they can be seen and/or used by a person sitting in that position. Further, the compliance test procedures of some FMVSS depend on the presence of such things as a human test driver who can follow instructions on test driving maneuvers or a steering wheel that can be used by an automated steering machine. NHTSA also seeks comments on the research that would be needed to determine how to amend the FMVSS in order to remove such barriers, while retaining those existing safety requirements that will be needed and appropriate for those vehicles. In all cases, the Agency's goal would be to ensure the maintenance of currently required levels of safety performance. These comments will aid the Agency in setting research priorities as well as inform its subsequent actions to lay a path for innovative vehicle designs and technologies that feature ADSs.
Notice and Request for Comments
The Department of Transportation (DOT) invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections.
General Motors, LLC, Receipt of Petition for Decision of Inconsequential Noncompliance
General Motors, LLC (GM), has determined that the seat belt assemblies in certain model year (MY) 2017-2018 Chevrolet Silverado and GMC Sierra heavy duty motor vehicles do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 209, Seat Belt Assemblies. GM filed a noncompliance report dated September 14, 2017, and amended it on September 22, 2017. GM also petitioned NHTSA on October 6, 2017, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety.
Final Decision That Certain Canadian-Certified Vehicles Are Eligible for Importation
This document announces a final decision by NHTSA that certain vehicles that do not comply with all applicable Federal motor vehicle safety standards (FMVSS), but that are certified by their original manufacturer as complying with all applicable Canadian motor vehicle safety standards (CMVSS), are nevertheless eligible for importation into the United States. The vehicles in question either (1) are substantially similar to vehicles that were certified by their manufacturers as complying with the U.S. safety standards and are capable of being readily altered to conform to those standards, or (2) have safety features that comply with, or are capable of being altered to comply with, all U.S. safety standards.