National Highway Traffic Safety Administration October 2010 – Federal Register Recent Federal Regulation Documents

Federal Motor Vehicle Safety Standards; Seat Belt Assembly Anchorages, School Bus Passenger Seating and Crash Protection
Document Number: 2010-27312
Type: Rule
Date: 2010-10-29
Agency: National Highway Traffic Safety Administration, Department of Transportation
In this final rule, we respond to petitions for reconsideration of a final rule published on October 21, 2008, which upgraded NHTSA's school bus passenger crash protection requirements. This document denies most of the requests in the petitions for reconsideration. To the extent we grant petitions, we make slight changes to the regulatory text of the October 2008 final rule to clarify the rule. We make clearer the procedure specifying how we will measure the height of school bus passenger torso belts, and we are clarifying that a requirement that seat belts be integral to the passenger seat (a requirement adopted to reduce the likelihood of passengers getting injured by or tangled in loose belts) also applies to seats that have wheelchair positions or side emergency doors behind them, even if the seats are in the last row of vehicles. We are also slightly revising the procedure for testing the self- latching requirement for school bus seat cushions, to specify the weight that is placed on the seat cushion in Newtons, to specify that the downward force is applied in a one to five second timeframe, and to specify that activation of the self-latching mechanism is assessed using the seat cushion retention test. Those provisions make the language more consistent with that of a pre-existing seat cushion retention test in the standard.
Reports, Forms and Recordkeeping Requirements; Agency Information Collection Activity Under OMB Review
Document Number: 2010-27239
Type: Notice
Date: 2010-10-28
Agency: National Highway Traffic Safety Administration, Department of Transportation
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on July 16, 2010 (75 FR 41565).
Reports, Forms, and Recordkeeping Requirements
Document Number: 2010-26714
Type: Notice
Date: 2010-10-22
Agency: National Highway Traffic Safety Administration, Department of Transportation
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections. This document describes one collection of information for which NHTSA intends to seek OMB approval.
General Motors, LLC, Receipt of Petition for Decision of Inconsequential Noncompliance
Document Number: 2010-26426
Type: Notice
Date: 2010-10-21
Agency: National Highway Traffic Safety Administration, Department of Transportation
Mazda North American Operations, Receipt of Petition for Decision of Inconsequential Noncompliance
Document Number: 2010-26425
Type: Notice
Date: 2010-10-21
Agency: National Highway Traffic Safety Administration, Department of Transportation
2017 and Later Model Year Light Duty Vehicle GHG Emissions and CAFE Standards; Notice of Intent
Document Number: 2010-25444
Type: Proposed Rule
Date: 2010-10-13
Agency: National Highway Traffic Safety Administration, Department of Transportation, Environmental Protection Agency
On May 21, 2010, President Obama issued a Presidential Memorandum requesting that the Environmental Protection Agency (EPA) and the National Highway Traffic Safety Administration (NHTSA), on behalf of the Department of Transportation develop, through notice and comment rulemaking, a coordinated National Program under the Clean Air Act (CAA) and the Energy Policy and Conservation Act (EPCA), as amended by the Energy Independence and Security Act (EISA) to improve fuel efficiency and to reduce greenhouse gas emissions of light-duty vehicles for model years 2017-2025. President Obama requested that the agencies issue a Notice of Intent to issue a proposed rule that announces plans for setting stringent fuel economy and greenhouse gas emissions standards for light-duty vehicles of model year 2017 and beyond. This joint Notice describes the agencies' initial assessment of potential levels of stringency for a National Program for model years 2017-2025, and describes additional work that the agencies will undertake over the next two months to refine this assessment further. This Notice fulfills that request and discusses the agencies' plans to issue a Supplemental Notice of Intent by November 30, 2010 that will describe plans for the National Program, including an updated analysis of potential GHG and fuel economy standards for model years 2017-2025. This joint Notice also announces the plans by the two agencies to propose such a coordinated National Program by the fall of 2011.
Reports, Forms and Record Keeping Requirements
Document Number: 2010-25485
Type: Notice
Date: 2010-10-12
Agency: National Highway Traffic Safety Administration, Department of Transportation
Before a Federal agency can collect certain information from the public, the agency must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatements of previously approved collections. In compliance with the Paperwork Reduction Act of 1995, this notice describes one collection of information for which NHTSA intends to seek OMB approval, relating to confidential business information.
List of Nonconforming Vehicles Decided To Be Eligible for Importation
Document Number: 2010-25484
Type: Rule
Date: 2010-10-12
Agency: National Highway Traffic Safety Administration, Department of Transportation
This document contains a correction to final regulations published in the Federal Register on Tuesday, September 21, 2010, (75 FR 57396) that revised the list of vehicles not originally manufactured to conform to the Federal Motor Vehicle Safety Standards (FMVSS) that NHTSA has decided to be eligible for importation.
National Emergency Medical Services Advisory Council (NEMSAC); Teleconference Meeting
Document Number: 2010-25164
Type: Notice
Date: 2010-10-06
Agency: National Highway Traffic Safety Administration, Department of Transportation
The NHTSA announces a teleconference meeting of NEMSAC to be held in October 2010. This notice announces the date, time and call-in information for the meeting, which will be open to the public. The purpose of NEMSAC is to serve as a nationally recognized council of emergency medical services representatives and consumers to provide advice and recommendations regarding Emergency Medical Services (EMS) to the U.S. DOT's NHTSA.
Model Specifications for Breath Alcohol Ignition Interlock Devices (BAIIDs)
Document Number: 2010-25131
Type: Notice
Date: 2010-10-06
Agency: National Highway Traffic Safety Administration, Department of Transportation
This notice proposes revisions to the Model Specifications for Breath Alcohol Ignition Interlock Devices (BAIIDs). The Model Specifications are guidelines for the performance and testing of BAIIDs. These devices are designed to prevent a driver from starting a motor vehicle when the driver's breath alcohol concentration (BrAC) is at or above a set alcohol level. Most States currently use BAIIDs as a sanction for drivers convicted of driving while intoxicated offenses. In 1992, this technology was new. Now that it has matured, NHTSA proposes to revise the 1992 Model Specifications, to test BAIIDs for conformance and to maintain a conforming products list (CPL) of BAIIDs that have been found to meet the Model Specifications. These proposed revisions are based, in part, on input from interested parties during an open comment period.