Federal Aviation Administration December 14, 2022 – Federal Register Recent Federal Regulation Documents
Results 1 - 7 of 7
Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 190-300 and -400 airplanes. This AD was prompted by the identification of a quality escape in the installation of certain fasteners of the lower beam (frame) splices of the overwing emergency exit (OWE) doors. This AD requires inspection, rework, if applicable, and replacement of the splice fasteners of the right-hand (RH) and left-hand (LH) OWE doors, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a report indicating that foreign object debris (FOD) could have been introduced during rework of certain engine fire shutoff switches (EFSSs). This AD requires determining the serial number of the left and right EFSS and replacing affected parts. This AD also limits the installation of affected parts under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702) airplanes, Model CL-600-2C11 (Regional Jet Series 550) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, Model CL-600- 2D24 (Regional Jet Series 900) airplanes, and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a report that the pressure switch gauge assembly for the cargo bay fire extinguisher container has the potential to display an incorrect pressure under certain environmental conditions. This AD requires replacing affected high rate of discharge (HRD) and low rate of discharge (LRD) pressure switch gauge assemblies for the cargo bay fire extinguisher container. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-12- 11, which applied to all Airbus SAS Model A319-111, -112, -113, -114, - 115, -151N, and -153N airplanes; Model A320-251N, -252N, -253N, -271N, -272N, and -273N airplanes; and Model A321-251N, -251NX, -252N, -252NX, -253N, -253NX, -271N, -271NX, -272N, and -272NX airplanes. AD 2020-12- 11 required revising the existing airplane flight manual (AFM) to limit the use of speed brakes in certain airplane configurations, as specified in a European Union Aviation Safety Agency (EASA) AD. This AD was prompted by a non-stabilized approach followed by an automatic go- around that led to an airplane pitch-up attitude and resulted in an auto-pilot disconnection. This AD continues to require the actions in AD 2020-12-11 and also requires, for certain airplanes, installing updated FG 3G standard software for the FMGC, and prohibits the installation of affected FG standards, as specified in an EASA AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2021-22- 04, which applied to all Airbus SAS Model A318-111, -112, -121, and - 122 airplanes, Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes, Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes, and Model A321-111, -112, -131, -211, -212, 213, -231, and - 232 airplanes. AD 2021-22-04 required a one-time eddy current conductivity measurement of certain structural parts of the outer flaps to determine if the incorrect alloy was used, and replacement if necessary; and also required a one-time eddy current conductivity measurement of certain other structural parts of the outer flaps to determine if the parts were properly heat treated, and replacement if necessary. This AD was prompted by the issuance of an updated list of suspected parts, including those that may have been improperly heat treated. This AD continues to require the actions in AD 2021-22-04, and requires using an updated list of suspected parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also limits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Proposed Establishment of Class E Airspace; New Coalinga Municipal Airport, CA
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at New Coalinga Municipal Airport, CA. This action will support the airport's transition from visual flight rules (VFR) to instrument flight rules (IFR) at the airport.
Notice of Intent To Rule on Request To Release Airport Property at the Colorado Springs Airport, Colorado Springs, Colorado
The FAA proposes to rule and invite public comment on the release and sale of a 12.693 acre parcel of land at the Colorado Springs Airport.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
