Federal Aviation Administration January 27, 2022 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-400, -401, and -402 airplanes. This AD was prompted by a report that the epoxy primer on the internal bore of the nacelle and landing gear attachment pins was not applied, and corrosion on the internal bore of the wing rear spar attachment pins was found. This AD requires doing a detailed visual inspection of the nacelle to wing rear spar attachment pins, and the nacelle and landing gear attachment pins, for any corrosion, and doing all applicable corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 757 airplanes. This AD was prompted by significant changes, including new or more restrictive requirements, made to the airworthiness limitations (AWLs) related to fuel tank ignition prevention and the nitrogen generation system. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a report indicating that during production, the manual opening and closing of the over-wing emergency exit door (OWEED) prior to the installation of the OWEED interior panel could have resulted in damaged insulation blankets below the left and right OWEEDs. This AD requires a one-time inspection for damage of the insulation blankets below the left and right OWEEDs, and replacement if necessary, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-8F and 747-8 series airplanes and Model 777 airplanes. This AD was prompted by a determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band), and a recent determination that this interference may affect multiple airplane systems using radio altimeter data, including the pitch control laws, including those that provide tail strike protection, regardless of the approach type or weather. This AD requires revising the limitations section of the existing airplane flight manual (AFM) to incorporate limitations prohibiting dispatching or releasing to airports, and approaches or landings on runways, when in the presence of 5G C-Band interference as identified by Notices to Air Missions (NOTAMs). The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Criteria: Special Class Airworthiness Criteria for the Amazon Logistics, Inc. MK27-2 Unmanned Aircraft
The FAA announces the special class airworthiness criteria for the Amazon Logistics, Inc. Model MK27-2 unmanned aircraft. This document sets forth the airworthiness criteria the FAA finds to be appropriate and applicable for the unmanned aircraft design.
Agency Information Collection Activities: Request for Comments; Substantive Change to Multiple Previously Approved Collections: Aircraft Registration, Recording of Aircraft Conveyances and Security Documents, FAA Entry Point Filing Form-International Registry, and Dealer's Aircraft Registration Certificate Application
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request Office of Management and Budget (OMB) approval of a substantive change to multiple previously approved information collections. The FAA Reauthorization Act of 2018, Section 546, requires the implementation of systems allowing a member of the public to submit any information or form to the Registry and conduct any transaction with the Registry by electronic or other remote means. In response to this requirement, the FAA created Civil Aviation Registry Electronic Services (CARES) and intends to change its current information collection to accommodate electronic registry applications.
Amendment Class D and Class E Airspace; South Florida
This action changes the effective date of a final rule published in the Federal Register on September 8, 2021, amending airspace for several airports in the south Florida area. The FAA is delaying the effective date to coincide with the completion of ongoing airspace projects in the area.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This proposed AD was prompted by a report that the nose wheel steering selector valve (SSV) can be slow to deactivate under low temperature conditions. This proposed AD would require replacing the affected nose wheel SSV with a redesigned nose wheel SSV, and performing an operational test of the nose wheel SSV and nose wheel steering control system. This proposed AD would also prohibit the installation of a certain nose wheel SSV. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Textron Aviation Inc. (Type Certificate Previously Held by Cessna Aircraft Company) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Textron Aviation Inc. (Textron) Model 120 and 140 airplanes and all Model 140A airplanes. This proposed AD was prompted by reports of seat belt center bracket failures from overstress. This proposed AD would require determining if the seat belt center bracket is made of steel and replacing any non-steel brackets. The FAA is proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.