Federal Aviation Administration December 9, 2021 – Federal Register Recent Federal Regulation Documents
Results 1 - 10 of 10
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd. & Co KG (RRD) Trent 1000 model turbofan engines. This AD was prompted by the manufacturer revising the engine Time Limits Manual (TLM) life limits of certain critical rotating parts and direct accumulation counting data files. This AD requires the operator to revise the airworthiness limitation section (ALS) of their existing approved aircraft maintenance program (AMP) by incorporating the revised tasks of the applicable TLM for each affected model turbofan engine, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Various Helicopters
The FAA is adopting a new airworthiness directive (AD) for all helicopters equipped with a radio (also known as radar) altimeter. This AD was prompted by a determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band). This AD requires revising the limitations section of the existing rotorcraft flight manual (RFM) for your helicopter to incorporate limitations prohibiting certain operations requiring radio altimeter data when in the presence of 5G C-Band interference in areas as identified by Notices to Air Missions (NOTAMs). The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Transport and Commuter Category Airplanes
The FAA is adopting a new airworthiness directive (AD) for all transport and commuter category airplanes equipped with a radio (also known as radar) altimeter. This AD was prompted by a determination that radio altimeters cannot be relied upon to perform their intended function if they experience interference from wireless broadband operations in the 3.7-3.98 GHz frequency band (5G C-Band). This AD requires revising the limitations section of the existing airplane/ aircraft flight manual (AFM) to incorporate limitations prohibiting certain operations requiring radio altimeter data when in the presence of 5G C-Band interference as identified by Notices to Air Missions (NOTAMs). The FAA is issuing this AD to address the unsafe condition on these products.
Proposed Establishment of Class E Airspace; Dayton, OH
This action proposes to establish Class E airspace at Dayton, OH. The FAA is proposing this action due to new public instrument procedures being established at Moraine Air Park, Dayton, OH.
Proposed Amendment of the Class E Airspace; Corsicana, TX
This action proposes to amend the Class E airspace at Corsicana, TX. The FAA is proposing this action as the result of an airspace review due to the decommissioning of the Powell non- directional beacon (NDB). The geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.
Airworthiness Directives; Bell Textron Canada Limited (Type Certificate Previously Held by Bell Helicopter Textron Canada Limited) Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Canada Limited (type certificate previously held by Bell Helicopter Textron Canada Limited) Model 505 helicopters. This AD was prompted by the determination that reducing the pressure altitude limitations for certain fuel types is necessary. This AD requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model AS355NP helicopters. This AD was prompted by a report of mechanical deformation found on the protective cover (also referred to as switch guard) of the ``SHEAR'' control pushbutton installed on a co-pilot collective stick of a Model EC225LP helicopter, caused by incorrect handling; due to having an identical design switch guard installed on the pilot collective stick, Model AS355NP helicopters are also affected. This AD requires replacement of the protective cover of the ``SHEAR'' control pushbutton, and re- identification of the pilot collective stick, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Proposed Amendment of Class E Airspace; Palestine, TX
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Palestine Municipal Airport, Palestine, TX. The FAA is proposing this action as the result of an airspace review due to the decommissioning of the Palestine non- directional beacon (NDB), the VHF omnidirectional range (VOR) and distance measuring equipment (DME), and associated extension is no longer required and will be removed in the airspace description. The geographical coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for Pilatus Aircraft Ltd. (Pilatus) Model PC-12/45, PC-12/47, and PC-12/47E airplanes with Supplemental Type Certificate (STC) SA00634DE installed. This AD was prompted by a report of strake attachment brackets and the fuselage frame failing at the upper most bracket attachment location. This AD requires inspecting the strake, attachment brackets, surrounding structure, and bolts and replacing components and repairing damage if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Hélicoptères Guimbal Helicopters
The FAA is adopting a new airworthiness directive (AD) for H[eacute]licopt[egrave]res Guimbal (HG) Model Cabri G2 helicopters. This AD was prompted by the determination that certain parts need life limits and certification maintenance requirement (CMR) tasks. This AD requires establishing life limits and CMR tasks for various parts and removing any parts from service that have reached or exceeded their life limits. Depending on the results of the CMR tasks, this AD requires corrective action. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.