Federal Aviation Administration November 12, 2021 – Federal Register Recent Federal Regulation Documents
Results 1 - 16 of 16
Proposed Establishment of United States Area Navigation (RNAV) Route T-374; Kotzebue, AK
This action proposes to establish United States Area Navigation (RNAV) route T-374 in the vicinity of Kotzebue, AK in support of a large and comprehensive T-route modernization project for the state of Alaska.
Proposed Amendment of VOR Federal Airways V-26, V-193, and V-285, and Revocation of White Cloud, MI, Domestic Low Altitude Reporting Point in the Vicinity of White Cloud, MI
This action proposes to amend the VHF Omnidirectional Range (VOR) Federal airways V-26, V-193, and V-285, and revoke the White Cloud, MI, domestic low altitude reporting point. The FAA is proposing this action due to the planned decommissioning of the VOR portion of the White Cloud, MI, VOR/Distance Measuring Equipment (VOR/DME) navigational aid (NAVAID). The White Cloud VOR is being decommissioned in support of the FAA's VOR Minimum Operational Network (MON) program.
Airworthiness Directives; Pratt & Whitney Division Turbofan Engines
The FAA is superseding Airworthiness Directive (AD) 2021-05-16 for certain Pratt & Whitney Division (PW) PW4164, PW4164-1D, PW4168, PW4168-1D, PW4168A, PW4168A-1D, and PW4170 model turbofan engines. AD 2021-05-16 required initial and repetitive replacements of the low- pressure turbine (LPT) 4th-stage air sealing ring segment assemblies with parts eligible for installation. AD 2021-05-16 also required initial and repetitive dimensional inspections of the LPT case for bulging and, depending on the results of the dimensional inspections, repair or replacement of the LPT case. This AD was prompted by notification to the FAA of an inadvertent omission in the LPT 4th-stage air sealing ring segment assembly part numbers. This AD requires initial and repetitive replacements of the LPT 4th-stage air sealing ring segment assemblies with parts eligible for installation. This AD also requires initial and repetitive dimensional inspections of the LPT case for bulging and, depending on the results of the dimensional inspections, repair or replacement of the LPT case. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of VOR Federal Airways V-31, V-36, V-84, V-252, and V-510 in the Vicinity of Buffalo, NY
This action amends VHF Omnidirectional Range (VOR) Federal airways V-31, V-36, V-84, V-252, and V-510. This action is necessary due to the planned decommissioning of the VOR portion of the Buffalo, NY, VOR/Distance Measuring Equipment (VOR/DME) navigational aid, which provides navigational guidance for these airways. The Buffalo VOR is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program. The VOR Federal airways V-2, V-14, V-33, and V-164 modifications proposed in the notice of proposed rulemaking have been accomplished by separate rules subsequently published. As a result, the V-2, V-14, V-33 and V-164 modifications are removed from this rule.
Airworthiness Directives; Airbus Helicopters
The FAA is removing Airworthiness Directive (AD) 2021-05-02, which applied to all Airbus Helicopters Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350C, and AS350D helicopters; Model AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters; and Model EC130B4 and EC130T2 helicopters. AD 2021-05-02 required determining whether the helicopter has been operated in a severe environment since the last inspection of the main rotor hub-to-mast attachment screws, an inspection of the main rotor hub-to-mast attachment screws if the helicopter has been operated in a severe environment, and replacement of the main rotor hub-to-mast attachment screws if necessary, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which was incorporated by reference. Since the FAA issued AD 2021-05- 02, reported inspection results and further investigation have confirmed that the report of failed main rotor hub-to-mast attachment screws, which prompted AD 2021-05-02, was an isolated case which resulted from a maintenance mistake. Therefore, the FAA has determined that no unsafe condition is likely to exist or develop on the main rotor hub-to-mast attachment screws on other helicopters in the fleet. Accordingly, AD 2021-05-02 is removed.
Airworthiness Directives; Hélicoptères Guimbal Helicopters
The FAA is adopting a new airworthiness directive (AD) for H[eacute]licopt[egrave]res Guimbal (HG) Model Cabri G2 helicopters with certain part-numbered aluminum cooling fans (cooling fan) installed. This AD was prompted by a report of an occurrence of an in-flight shutdown due to a crack and subsequent failure of the cooling fan. This AD requires removing certain part-numbered cooling fans from service, or modifying certain part-numbered cooling fans before exceeding a certain total hours time-in-service (TIS), and installing newly designed cooling fans. This AD also prohibits installing any affected cooling fan on any helicopter. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-12/47E airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as inward vent valves installed during production without chromate conversion coating on the bonding surface. This proposed AD would require modifying the inward vent valves and prohibiting installation of unmodified inward vent valves. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; British Aerospace (Operations) Limited and British Aerospace Regional Aircraft Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain British Aerospace (Operations) Limited and British Aerospace Regional Aircraft Model Jetstream Series 200, Jetstream Model 3101, and Jetstream Model 3201 airplanes. This proposed AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as a bent control rod within the gust lock system, which may enable both power levers to be pushed into the flight range with the gust lock lever fully engaged. This proposed AD would require replacing the push rod assembly with a modified push rod assembly. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Leonardo S.p.a. Model AB139 and AW139 helicopters. This proposed AD was prompted by the identification of certain parts needing maintenance actions, including life limits and maintenance tasks. This proposed AD would require incorporating into maintenance records requirements (airworthiness limitations), as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace; Frankfort, MI
This action amends the Class E airspace extending upward from 700 feet above the surface at Frankfort Dow Memorial Field, Frankfort, MI. This action is the result of an airspace review caused by the decommissioning of the Manistee very high frequency (VHF) omnidirectional range (VOR) as part of the VOR Minimal Operational Network (MON) Program. The name and geographic coordinates of the airport are also being updated to coincide with the FAA's aeronautical database.
Proposed Amendment of the Class D and Class E Airspace and Revocation of Class E Airspace; Hammond, LA
This action proposes to amend the Class D and Class E airspace and revoke Class E airspace at Hammond, LA. The FAA is proposing this action as the result of an airspace review due to the decommissioning of the Hammond very high frequency (VHF) omnidirectional range (VOR).
Proposed Amendment of Class D and Class E Airspace; Janesville, WI
This action proposes to amend the Class D and Class E airspace at Janesville, WI. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the Rockford very high frequency (VHF) omnidirectional range (VOR) as part of the VOR Minimal Operational Network (MON) Program. The name and geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.
Proposed Amendment of Class D and Class E Airspace; Multiple Illinois Towns
This action proposes to amend the Class D airspace at Chicago/ Rockford, IL, and the Class E airspace at Poplar Grove, IL; Freeport, IL; Rochelle, IL; and Chicago/Rockford, IL. The FAA is proposing this action as the result of airspace reviews caused by the decommissioning of the Rockford very high frequency (VHF) omnidirectional range (VOR) as part of the VOR Minimal Operational Network (MON) Program. The names and geographic coordinates of various airports would also be updated to coincide with the FAA's aeronautical database.
Proposed Amendment of Class D and Class E Airspace and Revocation of Class E Airspace; Rochester and St. Cloud, MN
This action proposes to amend the Class D and Class E airspace at Rochester International Airport, Rochester, MN, and St. Cloud Regional Airport, St. Cloud, MN, and revoke Class E airspace at Rochester International Airport. The FAA is proposing this action as the result of biennial airspace reviews. The geographic coordinates of St. Cloud Regional Airport would also be updated to coincide with the FAA's aeronautical database.
Proposed Amendment Class E Airspace; Hugo, OK
This action proposes to amend the Class E airspace at Hugo, OK. The FAA is proposing this action as the result of an airspace review due to the decommissioning of the Hugo non-directional beacon (NDB). The geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.
Proposed Revocation of Class E Airspace; Carrizo Springs, TX
This action proposes to amend the Class E airspace at Glass Ranch Airport, Carrizo Spring, TX. The FAA is proposing this action as the result of the cancellation of the instrument procedures and closure of the airport. The geographic coordinates of the Indio-Faith Airport, Carrizo Spring, TX, would also be updated to coincide with the FAA's aeronautical database.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
