Federal Aviation Administration December 21, 2020 – Federal Register Recent Federal Regulation Documents
Results 1 - 10 of 10
Airworthiness Directives; Leonardo S.p.a. Helicopters
The FAA is proposing to adopt a new airworthiness directive (AD) for certain serial-numbered Leonardo S.p.a. (Leonardo) Model A109S and AW109SP helicopters. This proposed AD would require installing a placard in the baggage compartment, revising the existing Rotorcraft Flight Manual (RFM) for your helicopter, and inspecting the installation of the terminal lugs. Depending on the outcome of the inspection, this proposed AD would require restoring the installation of the terminal lugs. This proposed AD would also require modifying the helicopter to shim the baggage fairing assy (fwd up) away from the circuit breaker panel and incorporating protective coverings. This proposed AD was prompted by reports of several occurrences of fire ignition and smoke in the baggage compartment. The actions of this proposed AD are intended to address an unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Trent 1000-A2, 1000-AE2, 1000-C2, 1000-CE2, 1000-D2, 1000-E2, 1000-G2, 1000-H2, 1000- J2, 1000-K2 and 1000-L2 model turbofan engines. This proposed AD was prompted by the manufacturer's analysis which determined that cracks may initiate in the front seal fins and cause cracks in the low- pressure turbine (LPT) disk. This proposed AD would require repetitive inspection of the seal fins and, depending on the results of the inspection, replacement of the LPT disk before further flight. The FAA is proposing this AD to address the unsafe condition on these products.
Notice of Meeting of the National Parks Overflights Advisory Group
The Federal Aviation Administration (FAA) and the National Park Service (NPS), in accordance with the National Parks Air Tour Management Act of 2000, announce the next meeting of the National Parks Overflights Advisory Group (NPOAG). This notification provides the date, format, and agenda for the meeting.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2013-18- 08, which applied to certain The Boeing Company Model 737-200, -200C, - 300, -400, and -500 series airplanes. AD 2013-18-08 required repetitive inspections for cracking of certain skin panels of the fuselage, and of the fuselage skin along certain chem-milled lines, and corrective actions if necessary. AD 2013-18-08 also included a terminating action for the repetitive inspections of certain areas. This AD retains those actions, expands the nondestructive inspection (NDI) area, and adds airplanes to the applicability. This AD was prompted by reports of additional cracking in certain horizontal and vertical chem-milled step locations outside of those identified in AD 2013-18-08. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model AS332L, AS332L1, AS332C, and AS332C1 helicopters. This proposed AD was prompted by the failure of a second stage planet gear installed in the main gearbox (MGB). This proposed AD would require identifying the part number of each second stage planet gear assembly installed in the MGB, replacing an MGB having certain second stage planet gear assembly part numbers with a serviceable MGB, modifying the helicopter by installing a full flow magnetic plug (FFMP), repetitively inspecting the FFMP and the MGB bottom housing and conical housing for metal particles, analyzing any metal particles that are found, and applying corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-23- 05, which applied to all Dassault Aviation Model MYSTERE-FALCON 900 airplanes. AD 2019-23-05 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD continues to require revising the existing maintenance or inspection program, as applicable, to incorporate those new or more restrictive airworthiness limitations, and also requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Passenger Facility Charge (PFC) Application
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on May 8, 2020.
Airworthiness Directives; CFM International, S.A. Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) LEAP-1A23, LEAP-1A24, LEAP- 1A24E1, LEAP-1A26, LEAP-1A26CJ, LEAP-1A26E1, LEAP-1A29, LEAP-1A29CJ, LEAP-1A30, LEAP-1A32, LEAP-1A33, LEAP-1A33B2, LEAP-1A35A model turbofan engines. This AD was prompted by an investigation by CFM that showed a subsurface anomaly in a part manufactured using the same material as the LEAP-1A high-pressure turbine (HPT) stage 2 disk. This AD requires an ultrasonic inspection (UI) of the HPT stage 2 disk and replacement of any HPT stage 2 disk that fails the UI with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace; Mineola and Kenedy, TX
This amends amend the Class E airspace extending upward from 700 feet above the surface at Mineola Wisener Field, Mineola, TX, and Kenedy Regional Airport, Kenedy, TX. This action is the result of airspace reviews caused by the decommissioning of the Quitman VHF and Three Rivers omnidirectional range (VOR) navigation aids as part of the VOR Minimum Operational Network (MON) Program. The name of the airport is also being updated to coincide with the FAA's aeronautical database.
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), and CL-600-2D24 (Regional Jet Series 900) airplanes. This proposed AD was prompted by a report that some piccolo ducts for the wing anti-ice system have bleed holes that do not conform to requirements. This proposed AD would require, depending on airplane configuration, inspection for the presence of affected wing anti-ice system piccolo ducts and corrective actions, or replacement of affected piccolo ducts with new piccolo ducts. The FAA is proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
